...INPUT. THE DVD AND DTV INPUTS CUT OFF THE VIDEO SIGNAL AT TIMES, I HAVE TRIED DIFFERENT CABLES AND THE PROBLEM REMAINS. THANKS Hi, If you are trying to use HDMI video, and want to give autdio input ...
Mitsubishi WS-65905 DTV is green Plugged in new HD cable box into the DTV inputs, but all I get is a green washed screen. Looks like old B/W image with a green overlay. Image seems clear, but no real ...
...DTV/CBL (the TV). When any other input is selected, they have a bright red bracket around them but when DTV/CBL is selected, the bracket does not light up. I dont know what this means. I have fooled ...
Question about DCT6200 DTV Receiver
...DTV defective or is this hookup not possible? If the input of the tb110mwg was "overdriven" like though an external amplifier; then it IS possible to burn up the receiver. More than likely you just ...
Question about SIR-S4040R DirecTV DTV Receiver / 35-Hours Video Recorder
...DTV box to the RF input and the directv samsung box to an a/v input then change inputs using the tv remote. you will need an av cable (yellow/ red/white) for the directv box and a rf jumper cable for ...
Question about WS-55511 55" Rear Projection Television
...Input DTV accepts 480i/p and 1080i . When using Input DTV with a component connection(YPbPr) and you get a green or no picture then you will need to navigate the menus and setup input DTV for YPbPr ...
Question about WS-73909 73" Rear Projection Television
...Input DTV (480i/480p/1080i) This input is used to connect an external DTV receiver, and can be configured for YPrPb and RGB plus H&V signal types. As a special feature, you have the ability to ...
...to the DTV input, but I can't get into the DTV portion of the menu to set it up. You need to select the input is DTV. The "input" button on the remote control locates next to roll down
...input.turn DTV tuner on (VCR should have a TV\VCR switch that makes signal coming from tuner BYPASS VHS right into TV) note:: change channel FROM tuner.You should be able to record by placing a blank ...
...DTV input in my GV46L stays black. Why? The DTV input in my GV46L stays black and when I try to go to the menu the tv buttons have to be pressed hard. In the end I can't scan for channels ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions