Questions & Answers for: door code

...code is a door lock error. The control board will attempt 6 times to lock the door before displaying the F dL error code. This is an indication that either the door lock is malfunctioning or the ...

code and the door will close. However, if you try to punch in the code once the door is closed, it will not open. It only seems to acknowledge the keypad code to close the door. Also, the remote to my

code (driver door unlocks) and press the 3/4 control within five seconds. Locking the doors with the keyless entry system It is not necessary to enter the factory or personal code prior to locking all

...door's code. Obviously I've always had 3 different codes for each door. Today I punched in the code for door 3 and door 3 opened but so did door 1. The correct code for door 1 still works for door 1, ...

...door opens to the old code and the new code I just entered. How do I get the unit to erase the first code? You must hold that red button in for 6 seconds to erase the memory. Just remember you will ...

...then a pause then 1 flash then a pause then 1flash any ideas? 4 flashes is the code for door sensors slightly misaligned. The code you describe is not a normal trouble code. What is the door

...door, the inflow and drainage of water and the motor. The "FL" code indicates that the washing machine was unable to lock the door after you closed it. Open and close the door tightly, then restart ...

...Door Unlock code Washing machine displays error code F/DU after six attempts to unlock. -Door lock assembly failed. -Test door lock switch -Visually inspect wire harness connection on CCU, Door lock ...

1999 ford taurus door lock codes How do i reset the door lock codes on my 1999 ford taurus Door lock codes? Are you talking about the key pad on the door?

...code and the door either opens or closes and I can keep doing this. So only after I type in the code and press enter the first time, i can keep pressing enter and the door opens. How do I make it to ...