Questions & Answers for: control locked kenmore he2 washer

Kenmore HE3 CONTROLS LOCKED My HE2 stopped and now it says controls locked. I have wet clothes in the washer and have to know how to unlock the controls....HELP Apparently there is a child lock on the

kenmore he2 plus washer, controls locked on panel Hi hit and hold the volume button until the control lock goes out. You should be all set. Mike

control panel locked on my washing machine kenmore HE2 Hi Thanks for using FixYa. To unlock the controls you?ll need to press and hold the DRAIN/SPIN button for 10-15 seconds. Please do rate the ...

...button works on control panel. You have locked the control via the "Child Lock." Look for the button with a small padlock icon on it, press and hold for about 4 seconds to unlock. That should fix

...Kenmore HE2 Plus washer, how do I know if it's a Motor Control Unit/MCU (8540135) vs the Microcomputer Machine Control Unit failure (8540788)? Does, for example, the Motor Control Unit control the ...

...Kenmore washer however; your washer needs a reset to resolve the control lock problem. Press and hold the END OF CYCLE /CYCLE SIGNAL button for 15 seconds to reset the control. Please get back to me ...

...control panel (e.g. water temp, cancel). It acts normally like it's going to start the cycle- the door locked light comes on, the display shows the time length and there's a click like the ...

Kenmore HE Washer Model 11046472501 - add a garment light stays on with the door lock light on at the same time. We have unplugged the machine and ran the drain and spin mode, but he washer won't ...

...Kenmore HE2 Plus Model# 11047512600 There is a communication error in the control board. Also the door Latch assembly may be defective. Check & replace as necessary. Here is a link to Sears parts ...

Kenmore HE2 front-load washer error codes F01. Main control board EEPROM error. Check/ ... F11. Motor control board failure. Check/ ... F20. Not filling. Check/ ... F21. Will not drain. Check/ ... F22