close the toner door completely. If this door is not completely closed, the printer will not allow the laser shutter to operate, thus giving this error. Other items that U can fix themselves are to re
...close, the message "FATAL ERROR: 17H" has come up and it won't print - we have tried switching if off and that doesn't work. your printer is laser printer change toner cartridge right, you may try 1) ...
...close the toner door, and power-cycle the unit. Figure 5: Black toner door latch Verify that the inner toner door is properly positioned. Snap the door back into place at the two inner door-locking ...
to "Ready". Once it is ready, reistall the toner bottle and close the door and see what happens. If it is not cleared you most likely have a problem with the "HP" flag for the toner bottle. Good Luck.
check corona and toner doors How Hello sir; Did you recently replace new toner, if you did, please go back to check out does the door close right, otherwise you have to check the corona wire is broken
toner and close the front panel. The printer will try to warm up and then display to open the panel door. Open the door, insert the toner, close the panel and the machine error should clear. Hope this
warm up and then said to open the panel door. I then opened the door, inserted the toner, closed it and the machine error was cleared. Perhaps all you need to do is remove the toner and put it back in
...toner cartridge so that the door can close. In some instances, an "Error 12" appears due to some other issue, such as a missing toner cartridge or a defective paper-feeding component. MY PRINTER (HP ...
...toner is close. Prepare a new cartridge for replacement. You may temporarily increase the printing quality by redistributing the toner. If you have a new genuine toner cartridge, try resetting: With ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions