Bosch Logixx WFT 2806 Front Load Washer/Dryer Logo
Posted on Sep 01, 2008

Bosh Washing Machine F18 fault

Dear
would you be so kind to let me know how I can repair the F18 fault. I don't have the manual anymore but I believe it is due to a drainage problem and I might just need to clean the filter.
Many thanks
Marco

  • starm Sep 03, 2008

    Dear Frank
    thank you for your feedback, but how do I clean the pump? do you have a link to some online manual?
    Best Regards
    Marco


×

3 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 1 Answer
  • Posted on Oct 11, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Oct 11, 2008
Answers
1
Questions
0
Helped
3802
Points
9

I also had this problem - the machine was full of water and it flashed up F18. I had to drain the water out of the machine using the small pipe located next to the drain filter. There was loads of water to drain out. I used my oven roasting tray which was perfect for the job. Then I undid the screwcap filter. There was a lot of really black water that came out, along with about two pounds worth of coins and some hairgrips. Now my machine works perfectly !

A

Anonymous

Hello, F18 means pump is blocked or broken, clean filter first, no result change then you have to cahnge the pump.

Greeting Frank

Ad

bobfolino

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Dec 03, 2008
bobfolino
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Dec 03, 2008
Answers
1
Questions
0
Helped
3802
Points
1

Bosh washer will not adgutare or spin

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Bosh classic washing machine fault no F 21

Kindly read the manual or see a specialist.
0helpful
1answer

Bosch shx36l05uc/21: After running diagnostics the 'wash' button keeps flashing, can someone tell me what the problem is?

Hi Jeff, As you can see there's 3 different Bosh washing machine models, Hope you can find your error code.... CHEERS..

Bosch Washing Machine Fault Codes

F16 - Door lock error
F17 - Inlet valve error detected
F18 - Drain error detected
F23 - Anti flood device has been activated
F34 - Door lock error
F42 - Motor fault
F43 - Motor fault
F44 - Motor fault

Bosch WAE Range Washing Machine Fault Codes

F16 - Door lock problem
F17 - Inlet valve
F18 - Drain pump
F21 - Motor
F23 - Anti flood system activated

Bosch WFP Range Washing Machine Fault Codes

F01 - Water intake timeout
F02 - Heating timeout
F03 - Draining timeout
F04 - Motor fault
F05 - Uncontrolled motor startup
F06 - Short on NTC Detected on hot water intake
F07 - Open circuit NTC Open circuit wiring
F08 - Door open when program started
F09 - Unexpected heating
F10 - Communication error
F11 - Overheating
F12 - Short circuit
F13 - Mains voltage too high
F14 - Mains voltage too low
F15 - Faulty temperature sensor on motor PCB
F16 - Faulty rinse sensor Displayed only in test
0helpful
1answer

Bosch exxcel f18 error. Machine runs cycle but will not drain water. Have emptied and unblocked pump on front and checked drainage hose.

according to what i find on google, it's a drainage fault, drain manually and check filter...ALSO CHECK OUTLET PIPES FOR ANYTHING BLOCKED IN IT
0helpful
1answer

Hotpoint WMD960 F18 error code

I had the F18 fault.Nothing much worked except drain pump.
Simple solution for me was:
1)disconnect power 2)take off top of machine(2screws at rear) 3)locate the connector which fits on the rear of the main led display panel.4) Pull it off, squirt switch cleaner and replace with plenty of wiggling! 5) Put it back together and start washing !
Steve Brighton
2helpful
2answers

Hi I have got bosh logixx 8 1400 express and it is showing F18 on the display with an very annoying boop noise. Could u please help me in sorting out this . thanks

Error F18 means that the filter is blocked.

Look around for a propeller shaped part, it should be able to spin freely. If not, remove the debris so that it is unblocked.

Hope this helps
to solve it.
0helpful
1answer

I keep getting fault f18 for last 2 weeks

On a Hotpoint that error means:-
Communication Error - Book a washing machine repair.
3helpful
2answers

My washing maschine says F18. What does that mean?

If you let me know the Make of the machine, I can tell you exactly what F18 code is and what needs to be done to repair it.
Not finding what you are looking for?

3,812 views

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Oliver Street

Level 2 Expert

73 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...