Hi,
I'm hoping you can help me out with the problem I'm having printing off my MP160.
I'm getting this message when I try to print :
Error number : 300. The printer does not respond. Make sure that the printer is plugged in, powered-on, and properly connected to your computer.
The on/off lamp in the corner is on and the computer seems to be properly connected from the back port of the printer to the USB port on my Mac.
So what else could it be?
I've been able to use this printer before without any problems, now I'm suddenly unable to print!
Please help if you can!
Thank you!
Mark
[email protected]
Fiend your solution direct from Canon. Here is your solution...
http://www.canon.com/printer/prob676ijt65/solution
282
If you're facing Such Issue then don't worry have a look, your solution is here
Try out any of these solutions to fix Canon Printer Error Code b300:
§Turn off the printer, disconnect the power cord from the electrical outlet. Now, you should hold down the power button for a minute. Then, reconnect the power cord to the electrical outlet and switch on the printer
§You can also clean the ink cartridges contacts to fix this error code
§You should open the printer, wait for the carriage to slide over. Then remove the ink cartridges and clean the print head with cotton swabs dipped in hot water. Once it is finished, allow to dry the print head and replace the cartridges.
If you still stuck then do visit this site: Canon Support Code 300
Toll-Free No: +1-888-633-7151
How To Fix Canon Printer Error Code b300 1 888 788...
How To Fix Canon Printer Error Code...
This problem drove me nuts for an entire day - neither my Mac nor my Windows machine would print after resetting the ink levels using MPTools. I kept trying things until, as a last resort, I decided to reinstall the drivers (which did not seem to me like it would do anything as the printer was working fine before in the two machines with the existing drivers) Voila, that fixed it. I had to reinstall the OS X and the Windows drivers. In the Windows side I had to delete the existing printer drivers first, then reboot. On reboot Windows discovered the printer and reinstalled the driver. It started working again.
It may be that driver re-installation clear certain caches in memory - only Canon knows.
Next time I am getting an HP printer.
According to my list error E 300 means servicing required. how much that would be is anyone's guess.
372 views
Usually answered in minutes!
ik kan niet meer printen sinds ik de inktcartrige heb vervangen. Ik krijg een melding dat de printer niet is aangesloten (op de computer als ik wil afdruken). Dit heb ik nagekeken de stekkers zitten allemaal goed. "Communicatie met de printer is niet mogelijk."
Ik heb alleen de cartridge vervangen meer niet
MY printer does not respond. Make sure that the printer is plugged in, powered-on, and properly connected to your computer.
my printer suddenly stop performing all the work ..as scanning and printing. it was working good and after an hour it does not repond to our command.it just take the paper in and the output is blank,i checked the ink level and all the wires connect to the printer.. i am confuse ..please help me out.
×