HP LaserJet P3005n Printer Logo
Posted on Jul 08, 2011
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Getting blank print outs with one base line printed of symboles and letters mixed in Hp laserjet P3005.

1 Answer

Mark Schmit

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • HP Master 1,915 Answers
  • Posted on Jul 08, 2011
Mark Schmit
HP Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Nov 04, 2010
Answers
1915
Questions
0
Helped
754066
Points
7967

The two most common problems that cause this are:

1. bad cabling. Check and make sure cables are properly seated and try a different cable if you have one.

2. wrong or corrupted print driver, try uninstalling and reinstalling the driver for the printer.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Vertical line on page from HP P3005

clean the drum of the toner with tissue paper and reinstall hopefully it will resolve the issue
0helpful
1answer

HP LaserJet P3005 Printer will not print using a parallel cable.

# Switch off the printer, cancel pending jobs..Refix parallel cable both ends & tighten them Check proper drivers installed or not if not install proper drivers.. shoot print command. check..if not resolved...For tech guys:# Replace cable..checkRemove printer formatter, check any dry solder or pin breakage at parallel port.(show in snap shot), found... try to repair it or replace the formatter assm. Check system parallel port working or not...



12_30_2011_5_20_49_pm.jpg
0helpful
1answer

HP laserjet p3005 it was working ok as we don=ont change the settings often. From yesterday, as soon as we give a print command, it gives a message "LOAD TRAY 1 LIGHT LETTER, then when we press green...

This is a settings problem, you will need to go through the paper handling menu on the printer and on your computer to ensure they are set to the correct paper size that you are trying to print on.
1helpful
1answer

My laserjet p3005 is not printing properly. there are 6 blank horizontal stripes across the page.

This is almost always going to be the toner cartridge. Swap it out if you have a spare. If not even if you have an empty one, just shake it a bit and put it back in to see if the blank lines go away. It is at least 90% chance or better that the problem is in the cartridge.
Good Luck and Thank You for using Fixya.
WheatlandServices
1helpful
1answer

How do I find the MAC Address for a HP LaserJet P3005 Printer. I am attempting to set the printer up for network use.

Print out the configurationpages and there you'll find the MAC adres.Use the arrow down button to scroll to the informationmenu, scroll down to "print configuration" and press the green button.
0helpful
1answer

Verticle lines printing on laser printer

Check the fuser. If it is the fuser, you should be seeing 3 dark lines on the fuser film. Here is the picture about how the film looks like:
d0e1b68.jpg

Changing the film usually solve the problem. However changing the film itself is difficult. You have to remove and basically disasseble the fuser, and change the film. However it is fairly cheap and if you decide you would like to save some money, here is the link available in ebay:
http://cgi.ebay.com/Fuser-Film-Sleeve-HP-LaserJet-P3005-RM1-3740-/250558576965?cmd=ViewItem&pt=BI_Toner&hash=item3a56747945


Or, simply search for 'P3005 Fuser Film' and you will find a lot.

Other than that, you can change the entire fuser. Please note that fuser for P3005 is not consumer installable part. You still have to take out some parts in order to change the fuser.

The parts are available from many parts supplier. Simply google 'P3005 fuser'. Usually around $100 for a refurbished fuser.

You can also recycle your old fuser and get some moeny! (about $15-$25 per fuser).

Good luck!
0helpful
2answers

Hp 3005dn prints blank pages, even the configuration pages requested from the machine itself

if you haven't any error message then you may have a problem in laser shutter, check and reseat your catrtidge, or you have a problem in your DC Controller
0helpful
1answer

HP P3005 - skid marks along paper's edge

Print 3 pages. Use the manual feed tray. As they print, open the cover, remove the toner and look down at the paper in the printer. Do you see marks along the edge? If no...replace the fuser. If yes...it could be the transfer roller.
2helpful
2answers

Error 49A What does this mean?

Hi! I will be glad to assist you. If this is your issue, here are the steps you need to do:
HP LaserJet P3005 Printer Series - Service Error 49.0E00 when Printing PDF Files from Mac 10.5
Issue
A Service Error 49.0E00 message appears while printing PDF files from Mac 10.5 with the EconoMode setting enabled from the printer control panel and using the printing presets with the EconoMode setting disabled.
Solution
Recommended action:
Disable the EconoMode setting from the printer control panel (the default setting is OFF ).
Select printing presets with the EconoMode setting disabled.
Try performing a test print from PDF files in the computer to check for the results.
NOTE: If it is required to use a printing preset with the EconoMode feature turned off, ensure that EconoMode is set to OFF from the printer control panel also.
or you can go to this link:
http://h10061.www1.hp.com/ccsearch/search?ctry=us&lc=en&dlc=en&mode=lz&tmv=0&method=prodFinder&pid=1846089&productBigSeriesOid=1846087&spid=1846090&pname=HP+LaserJet+P3005+Printer&opname=HP+LaserJet+P3005+Printer&pname_desc=HP+LaserJet+P3005+Printer&st=1&ptype=commercial&stype=pn&qry=Error+49A&translate=&iqry=&ctflag=&temp_hql=s-001%2Cs-002%2Cs-004%2Cs-003%2Cs-007%2Cs-005%2Cs-017%2Cz-001%2Cc-002%2Cc-001&spname=HP+LaserJet+P3005+Printer&cqry=&uqry=&product_line_code=PQ
Not finding what you are looking for?

78 views

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6688 Answers

k24674

Level 3 Expert

8093 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...