SOURCE: print to bypass
Before printing click the property button, go to papar tab, under tray select, change from auto select to by pass tray
SOURCE: Unable to print #10 envelopes on my Xerox
Although you can lie to the 76XX series machine and get it to print on envelopes, the machine clearly shows that it does not take envelopes on the tray pictures. "Only C4 (229 x 324 mm / 9 x 12.7 in.) and C5 (102 x 229 mm / 4 x 8.7 in.) sized envelopes can be used with this printer; Number 10 envelopes are not supported. Attempting to use any other envelope sizes in this printer could result in jams. or damage to the printer. Do not use envelopes other than what is supported. "
Insert them Face up, flaps closed, leading edge to the right. When it asks, tell it envelopes, and give the size.
In the Envelopes section, under Mailings, Options, choose face up, and the 5th picture. It should work, but the envelopes sure get wrinkled.
SOURCE: Ricoh Aficio 2035 all-in-one laser won't print from Bypass Tray
there are two places to set the paper tray on the ricoh aficio 2035 print drivers first make sure you are using the PCL 5 drivers not pcl6 or rpcs then go to the printers folder and set the defaults by right clicking the printer and selecting properties printing preferences, then go into word and select print set up and properties then defaults for printer select bypass tray and select labels enter the correct sheet size for the labels from the drop down box click apply and you should be set.
if this resolves your issue please rate my anser accordingly
regards
SOURCE: error code 007-954 Unable to print labels from
I am sure you have reviewed the paper setting, so it may be a bad Paper Out Sensor 130E82190 or Actuator 120E11971
It's possible that the whole Tray 5 MPT 059K24801 may be bad
Whit
Item, Inc
SOURCE: when i print label in bizhub c360 i put the label
Make sure the bypass tray is set to the correct size in the drivers.
456 views
Usually answered in minutes!
×