Color Printer prints fine, recently replaced all ink, but lately I try to print, but picture comes out too yellow, what can I do?

You may have blocked yellow print head nozzles.

Try the printer maintenance to clear the printer nozzles.
After several deep cleaning attempts and there is no improvements in the printthen a new print head is required.
A new print head maybe expensive and it maybe more cost effective to purchase anew printer.
The Print head will contain all the nozzels for all the different colors so you cannot just replace a single color print head nozzels.

goto printer properties and under the utility tab, print the nozzle check print out to see which color is missing.. if your picture is only in Cyan color, most probably your Yellow and Megenta is clogged.. try doing the print head cleaning and see if there is any improvement to your print out.

If you haven't printed a lot lately, your print head might clogged. Here's what you can do: go to "print", then "properties", then "maintenance", and find the option "head cleaning". You will hear strange sounds coming from inside your printer, nothing to worry about, the printer is just trying to push the ink through the print head. In the end, the printer will print 4 colors: black, yellow, magenta and cyan. If the colors seem ok to you, you have fixed your problem. If not, repeat the process several times (just bear in mind that cleaning the head uses a lot of ink).
Hope that helps, and if it doesn't, please let me know, would love to help find a solution to your problem!

Use only original ink cartriges, the non original has ink normaly is not for you printer, and you wast your money and damage the printer print-head

On a picture that you have printed, when you see an area of green, what color should it be? You probably have reduced flow of one of the "balancing" colors. Blue, Yellow and Red add up to Black. If your picture is supposed to be almost black and you don't have enough red, the color will pull toward the blue and yellow, giving it a green tint.

Hello sir; Why don't try to press "resume" key before you print.

yha way not
if you worry about wrong colors
it is possible you 3 colors cartage has mis a color it is maybe red,green,are yellow, refill your cartage and print again

The Color printer catridge ink might be low . You nned to replace.

the problem is very simple the magenta ink the cartridge is over or the head is been blocked from where the magenta ink comes out,
because red colour requires ---yellow plus magenta(pink)----to make it red.and ----dark yellow plus magenta(pink) -------- for brown colour.

There is probably dried ink blocking the tubing or print head.

The Maintenance section of your user's guide has a procedure for cleaning the print head and testing the ink nozzles. It may be necessary to have the print head replaced if the maintenance procedures won't clear the problem.

If you don't have the owner's manual, you can download it from Canon on this web page.

Good luck...and I hope this helps!!