I cant figure out how to set time and date - Armitron 40/8125BLK Digital Sport Watch

try this link
http://www.armitron.com/watch_instructions.asp
and this link this is all i can find
http://www.armitron.com/docs/ArmitronGentsDigital.pdf

This LUPO anion watch emits negative ions and infrared which make you calm. It soothes and relaxes your mind. How to set the time and date: This unique watch can display month, date, time & minute. 1.Press A button twice. (Date and Time displays when press once) 2.When the month figure appears, press M to set the month. 3.Press A button once again, the date figure appears and press M to adjust the date. 4. Press A button once again, the hour figure appears and press M to set the time. 5.Press A button once again, the minute figure appears and press M to set the minute. When you adjust one of among the month, date, time, minutes, just keep press A button until the desired figure appears and press M to adjust. Press M to see the date. Generally A button is to select the function. (Month, Date, Time, Minute) M button is to adjust the function.

There should be a small button at 2 o'clock on the side of the case that will advance the date hand on position each time it is pressed.

Click on my profile (escapement) and browse through my tips and tricks. There are plenty of watch manuals.

Use this link and browse through my TIPS AND TRICKS: http://www.fixya.com/MyProfile/tips.aspx?usrid=1700524. You will find manual for your watch there.

Click on my profile (escapement), then click on Tips and Tricks. There you will find links to all watch manuals. Rate me, please

I figured it out...thanx

I cant figure out how to set the time and date on the armitron instalite

When you pull the dial out, you can pull it out into two different settings. One will allow you to set the clock/time. The other will allow you to set the date (the day of the month). It took me a while to figure this out as well, even witht he manual.

THE REAL SOLUTION:
1. Hold down (light/el/set--the top right button) for 2 seconds to enter real time setting mode. 2. Press Mode key (bottom left button) to skip around to the different setting items. 3. Press Reset (top left button) to lower a setting. 4. Press ST/SP (bottom right button) to advance a setting (like increasing the time). 5. The day of the week will show automatically if you were correct in setting the year, month, date, and local city.