Refrigerators Logo

Related Topics:

Anonymous Posted on Mar 09, 2011

Subject: 'New' Kenmore bottom freezer refrigerator door dispensor error code. Fridge+freezer work, however, digital display has following error code: "Er......1F" where "Frz Temp+Ref Temp" displays are located. Unplugging+plugging power cord resets and it works for just a few minutes before going back to error codes. That stops water/ice maker from working also. Fridge is only a few months old. 1st time for problem. Any help appreciated, thanks, regards, Mark. Note: (doors were removed/installed upon delivery to fit kitchen entrance).

  • Anonymous Mar 09, 2011

    Yes, just got off phone with Sears repair. Part will be replaced under warranty this Friday. (They are 'bending over backwards' to fix this 'new' fridge since I am a Sears Reward customer). Their technical dept. knew all about that specific code and should R+R the ice maker fan motor with no problem. Thanks! Regards, Mark.

×

1 Answer

ZJ Limited

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Master 17,989 Answers
  • Posted on Mar 09, 2011
ZJ Limited
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Jul 15, 2008
Answers
17989
Questions
0
Helped
14453640
Points
60858

This is a bad fan motor (click here like a sample replacement) inside the back wall of the freezer, you will need to replace it with part number that could look it accroding with your model. You can order the parts you need from the following places:
- http://www.apwagner.com/
- http://www.repairclinic.com/
- http://www.searspartsdirect.com/

So, according with your comments, if your device has few months, before to take off some part, I suggest contact your dealer or technical service keeping under warranty service.

Hope this helps.

  • ZJ Limited
    ZJ Limited Mar 09, 2011

    That is where the error codes come up on an LG unit (quote), the computer is not seeing feedback from the fan, which has been a major problem since this unit has come out on the market, usually you can unplug the unit for 5 minutes and plug it back in, the error code may not come back for days,weeks or months, but it always comes back to the fan motor...

    I gave you the wrong part number this is the ice maker fan motor, sorry about that, the error is IF not 1F If it was the freezer fan the FF would come up, the correct part number is XXXXX (check sample here).

  • ZJ Limited
    ZJ Limited Mar 09, 2011

    Your welcome, thank you for using Fixya.

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Can't adjust freezer temp on kenmore, French door bottom freezer model 2537031321

This usually means there is NOT enough air flow over the sensor, The error message is indicative of a system evaporator fault. This can mean a faulty sensor or the evaporator fan motor may not be working. Indeed, the motor may be iced over. If the motor is bad, it will require replacement. Testing such would require testing the voltage. A manual: https://www.searspartsdirect.com/manual/6zhyaddlfh-000582/kenmore-25370313211-bottom-mount-refrigerator-parts

https://www.searspartsdirect.com/model/6zhyaddlfh-000582/kenmore-25370313211-bottom-mount-refrigerator-parts

https://www.searspartsdirect.com/diy/repair-help This section may offer help with the freezer. They sometimes offer videos, as well.

Some disassembly instructions might be available at the following link but the Sears site may prove of more assistance: https://www.repairclinic.com/RepairHelp/Refrigerator-Repair/4-6-1417133-/New/Kenmore-Refrigerator-253-70313211-ModelTroubleshooting
0helpful
1answer

ER CF error code on fridge

Sarah can you look in the refrigerator door or around the fresh food section door for a model number that looks like 106.78900 I need that number to be able to tell you what the error code is. Appliance 911 Sea Breeze
0helpful
1answer
1helpful
2answers

Kenmore Elite model # 795.77564600 refrigerator stops cooling; display on left side door reads ER FF

This is an error code that pertains to the evaporator motor but could also be the main board.
If the evaporator motor is running, the main board will probably need to be replaced.
It could be a wiring problem but it's not very likely.

If the motor is not running, some voltage checks will need to be made, at the motor and board, to determine which component has failed.
These checks require a meter and can be difficult to make, even for a technician.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.
0helpful
1answer
3helpful
1answer

Kenmore Elite Trio Fridge - Getting ER F5 error on display

Er-FS error code: Failure of freezer sensor.
I have been finding the fuseable link in the defrost system on these models open preventing the defrost cycle.
This would involve removing the freezer back panel and removing the sensor and fuse from the evaporator.
It's just a plug in.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question
0helpful
1answer

Kenmore elite refrigerator water dispensor not working

If you just got this unit, did you purchase it new? Or if it's uner a year old then you should call sera for service under the war. Also, when you first start the unit water has to go through the water tank and it takes 3 - 5 mins before the water starts to work when first hooked up, then should be ok after that. There are several things that can cause the problem. Could have a kinked line in the ref, a bad water valve or even a frozen water tank. Also, did the water ever work since you had it?
2helpful
5answers

Kenmore 795.7731 Fridge warm;freezer cold - Error er dH

I faced the same problem for Kenmore elite Trio Model # 795.77543600 bottom freezer refrigerator. The issue as pointed out by Medeer on fixya.com, turned out to be the part called component assembly, part number 6615JB2005H. I got this replaced yesterday but for 4 hours I did not notice any cooling... so I thought it did not work.... but then in the morning I notice that the issue has been resolved, the refrigerator is cold and there is no eR dH error message. Thanks to all who shared on this site.
0helpful
2answers

Kenmore bottom freezer refrigerator

This sounds like the Maytag bottom mount that has a High Voltage Control Board problem. Does this have the freezer/fridge temp. display/controls on the left hand fridge door? Whats the model number and on the manufacture tag does it something on it like Code:0304 maybe? Let me know I may have an answer I do work on these for a living.
Not finding what you are looking for?

91 views

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you a Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...