I have an electrolux edc 310m dryer completely disassembled and I'm looking for some instructions to get it back to work. THANK YOU

try jimmys .com

Good Afternoon Friend, thank you for your post!

I understand that you are looking for instructions on how to disassemble the tub from your Frigidaire dryer. Please describe what your dryer is doing so that I can assist you better in pinpointing the problem before you take this step. Thank you! - Z

its a heating problem but may not be the element could be the main board

Hi Wendy, this is AP
I understand you want to reverse the door opening on your Electrolux dryer. I would be happy to assist you with those instructions. Are you able to provide the model number for your dryer? If this is a new dryer you may visit the manufacture website, locate your appliance, scroll down to bottom and you will see a listing of documents available, the installation instruction manual will have the reversal instructions listed. . I hope this information helps to some degree - thanks for your question, and please do not hesitate to reconnect if you have additional information regarding your question.

Thank you,

I have just spent 2 days trying to find a belt for a eurotech edc 158 Dryer. The company went out of business a few years ago and there is only one place to get parts. Call 972-941-1900. You will have to leave a message for a call back. Belt is $61 with shipping. They indicated they replacement parts will be available for 4 more years.

Remove the dryer from the vent leading to the outdoors and try drying a load. This will reveal a restricted external/internal exhaust. If it dries in a normal cycle, it means the duct to the outside needs replaced or cleaned.If it still takes too long, the washer may need some maintenance to make it extract more water. If none of the above resolves the issue, the dryer will need to be disassembled inspected for worn, parts/air seals, etc. Follow the link below for disassembly instructions
https://www.repairclinic.com/RepairHelp/Dryer-Repair-Help

I’m happy to assist further over the phone at https://www.6ya.com/expert/david_dc2f9e0a44104720

you can look here for diagrams on some http://www.partselect.com/dryer+repair+repair.htm and here for some diagrams on some also http://repair2000.com/wpoolbelt.htm

Hello,

Same problem happened with our machine.
Have you figured it out already? ;-)
Laz

Hi,

Here is a tip that I wrote about dryers and noises...

It will help you determine what is happening there...

Dryer Repair Squeaks, Grinding, Clicking and Knocking Noise


heatman101

Asker's Testimonial "That answer was very informative - thank you for taking the time to educate me. " - teresa241964

My only thought is to look at the back of the drier. Check the hose coming out the back to the out side vent, and then run the drier with out the hose for a few moments. See if you have air moving then, if you have no air moving with out the hose attached. Your driers fan blades are ether clogged with lint or they have broken off some how.