Goto this website
http://www.genevawatchgroup.com/
Click on customer service, scroll down the center of the page untill you get the user manuals, your manual is there.
let me know if you need anything else.
Thanks,
Ekse
Heres the user manual
http://www.genevawatchgroup.com/pdf/Kenn...
100 pages, do you need anything else?
if not, please click on accept on my solution, if you need anything else let me know.
Thanks,
Ekse
×
Your Kenneth Cole has four push button and one for winding button. the first button has mark of LIGHT , the below button is MODE ,,upper right START/STOP,,, lower is LAP/RESET. the center button is what they called it a CROWN to set crown is just pull it and you can set the hour and minute. the LIGHT button is the set button also, just press it for 15 seconds if dial flashes, then go to MODE button and choose what going to set, the START/STOP -- LAP/RESET is the scroll button you going up and down the number or on /off ,some model of chronograph the set is in the MODE button just press it long and if flashes it ok. and follow procedure what i said before. setting cannot damage the watch. Feel free to ask question regarding your to watch so i can assist..
hope this may help;
Regards;
VOTIT
did the solutions from all of us experts solved your problem if not then let us know the current updates so all the fixya experts can assist you further.
Diplodocs - CASIO: 1506 references - Your user manual immediately available!
Your Kenneth Cole has four push button and one for winding button. the first button has mark of LIGHT , the below button is MODE ,,upper right START/STOP,,, lower is LAP/RESET. the center button is what they called it a CROWN to set crown is just pull it and you can set the hour and minute. the LIGHT button is the set button also, just press it for 15 seconds if dial flashes, then go to MODE button and choose what going to set, the START/STOP -- LAP/RESET is the scroll button you going up and down the number or on /off ,some model of chronograph the set is in the MODE button just press it long and if flashes it ok. and follow procedure what i said before. setting cannot damage the watch. Feel free to ask question regarding your to watch so i can assist..
hope this may help;
Regards;
VOTIT
×
Try to reset the watch
Try pulling the button out, it has 2 positions, one to set date an the other to set time functions
I couldn't find any download for the manual. Using this form you can contact Kenneth Cole and ask them to send you a replacement
Otherwise call "1 800 ken cole" from USA
Try also this number Phone: (718) 729-8600
Is for
Kenneth Cole Geneva Watch Co Inc
47-50 33rd
Long Island City, NY 11101
Phone: (718) 729-8600
Fax: (718) 729-8761
They will direct to the part department and send you the manual.
×
427 views
Usually answered in minutes!
Tried pulling out the knob, but still can't get the digital time display to coincide qith the hands.
How are alarms set in this watch?
×