At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: How do I change the "," to a "."?
My caculator is...
To switch the radix point between US and European modes, turn off the calculator, press and hold the decimal point key, press and release the ON key, then release the decimal point key.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
when the reset button pops it indicates an over load situation and it works to prevent further damage to the unit
could be a start run capacitor failed or the compressor seized
call an ac technician for a check and a quote
Well MAX to MIN on the dipstick is a quart of oil in difference. You need to have the oil changed every 3,000 miles (5,000 miles for a synthetic). I don't think that a 2006 Nissan should burn a quart of oil every 5,000 miles. That seems a bit absurd. For much older vehicles this might be true but for a 2006, much more efficient vehicle, it should not burn a quart every 5.000 miles.
They're indicating that you have nonzero values stored in memories 2 and 3. To get rid of the display indicators, simply store zero into the memories. Press 0 STO 2 0 STO 3.
It used to be every 3 months or 3,000 miles but some manufacturers are suggesting that 5,000 miles is ok. My view is that it does not hurt the motor having more oil changes. I continue to have them done every 3,000 miles myself even if my oil life indicator has not come on. Clean oil is very important to have a engine last for many miles. There are some full synthetic oils that can go for 5,000 or 7,000 miles beteween oil changes but cost alot more than the standard oil.
You can download the manual from http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=346&modelid=15431
That indicator is on to remind you that you need an oil change. It comes on automatically every 5,000 miles; and needs to be reset when the oil is changed
It means that 5,000 miles have passed since your last oil change or reset of the indicator, change the oil if it has not already been done.
you can reset the indicator by putting your key in the slot next to the indicator if you have one, Or try to hold down the "Trip" button so it resets and this should work
×