Minolta photocopier code c 3310 - Konica Minolta Konica 950640 Developer Developer for Konica Fax 7075 Black Konica 950640 Fits printer models 70

Minolta cspro ep 1031 My photocopying machine is sending me blank pages after photocopy

what code ? sir/mam what number?

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Code M2 means your photocopier machine require maintenance.In maintenance some old parts of your machine will be replaced with the new one and all this will be performed by technical services representative.

Code M2 means your photocopier machine require maintenance.In maintenance some old parts of your machine will be replaced with the new one and all this will be performed by technical services representative.

manual service adjustment

You can download all manuals user manuals for your machine at kmbs.konicaminolta.us . However user manuals will NOT have C-codes in them for the customer.
I do not see a error code C-6xxx. If you would post the error I may be able to help you with the problem.

MINOLTA EP2010

C0400Exposure lamp does not turn on or AE sensor problem
1 Check the sanity of the lamp of the scan, contacts of the lamp
2 Contacts of the sensor to automatic exposure, he near by lens, do cleaning optometrists.

Image unit code. new image unit required first try powering machine on then off. Does operator screen say Image unit needs rreplacing

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Transfer belt code C096 mite try open and closing the front door where you put the toner. Also remove the image transfer belt and then reseat it.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f