LG 47LG50 47 in. LCD HDTV Logo
Posted on Dec 07, 2010
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

47LG50 UG flat panel tv acting weird. Volume increases, channel changes, TV turns on automatically. Any suggestions?

2 Answers

Bill Usher

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 2 Answers
  • Posted on Apr 12, 2017
Bill Usher
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Apr 13, 2015
Answers
2
Questions
1
Helped
1190
Points
7

I had the same problem. I just disconnect the control board on the right side of the tv ordered a new board used the remote until I was able to replace the board.

Chi Chu

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • LG Master 8,457 Answers
  • Posted on Dec 07, 2010
Chi Chu
LG Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Jul 01, 2009
Answers
8457
Questions
0
Helped
2821050
Points
26282

Tries tv unplug,replug it back like about an hour.The tv now,will be resetting itself back to the factory setting.The tv now,should be working right again.Not, if it have the same problems,than the tv Tuner signal board have internal shorting problems.That the board,where the incomming broadcasting signal cable plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish tv Tuner signal board for the replacement.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

AUTOMATICALLY CHANNEL / VOLUME AND MODE CHANGING

please check touch key board i think it is defect

thanks lal electronics
2helpful
1answer
13helpful
2answers

I have Onida TV Model 21 inch , I accidentally enable the features of volume lock, hotel mode and channel lock and I cannot reset the same. Due to this, I cannot increase volume of telivision

MIGHT WORK IF YOU:
Turn off tv with remote, that is standby, then turn off tv with switch or unplug from wall. Wait a few minutes until led lights go off on tv. plug tv back in. try pushing vt on remote and power button on tv at same time.
If this doesn't work try contacting a local retailer, they always have a list of codes for their salesmen.
0helpful
1answer

The front panel on my SRT2232S Sylvania TV has began acting weird. The menu button will turn up the volume and the volume buttons change channels. When I let go of the menu button the volume goes back to...

This can be due to moisture build up or dirt accumulating with a static charge to induce voltage and so change the customer control panel switchings.
You can try with a good cleaning of the board and panels. Make sure to dry if moisture is seen. Also check for static conducion of high voltage to the control panel that can induce the inputs to work erratic.
if not check the processor section- processor damage- and the board for a possible weakness.
0helpful
1answer

Volume automatically goes to maximum on TCL TV

The volume (+) button on the TV is stuck or soiled if the volume automatically increases when the TV is turned on. To find out:
  1. Turn off the TV.
  2. Press and hold the volume (-) button on the TV then turn it on.
  3. If the volume doesn't automatically increase, you have a stuck button.
  4. If it does increase, you have a faulty key control board.
  5. In either case, you have to replace the key control board.
To find it out further:
Warning: Beware of electric shock.Please do not proceed if you do not have the skill to do the following.
  1. Unplug the TV.
  2. Let it stand for 15 minutes to allow voltages to drain completely to avoid the risk of electric shock.
  3. Remove the screws securing the TV's back cover and pull it off.
  4. Disconnect the cable that runs from the main board to the control key board.
  5. Turn the TV on using the remote.
  6. In this manner you can use the remote control to run the TV while waiting for the control key replacement board.
To do a hard reset of the TV, unplug it and let it sit for 2 hours or long enough to completely drain the internal voltages.


0helpful
1answer
1helpful
1answer

Changes channel by its self it goes crazy

You have ONE of two possibilities....on the Front panel buttons, you MIGHT have a stuck button or leaky button....

I suspect that if ALL it does is change channels...it would be a channel UP or DOWN button stuck....yes, it can fire up the tv too....But it will dedicate itself to doing only ONE function.

IF you have multiple operations, like changing channels, menu appearing, volume changing....then the MOST likely problem is actually the microprocessor causing the problem....BUT it is STILL possible to have SEVERAL buttons stuck....rare, but possible.

And unfortunately unplugging it won't even help in any of these possibilities....

You have to start with pressing each and every button one at a time and see if the problem stops afterwards....

IF it doesn't, then the next step is to measure the resistance across each button....they should read Infinite ohms.

If any measure lower, the button should be removed and see if the TV acts normally...

IF the buttons are located on a separate board with a plug that can be disconnected, you can just disconnect that while it's acting up and see if the problem disappears.....

If it still misbehaves after this, you NEED to get it to a TV tech for further analysis with a scope.....
0helpful
1answer
0helpful
2answers

Emerson 37 in LCD Television

the problem can be fixed by replacing the digital main board. if its under warrenty take it in and have it replaced for you.
0helpful
1answer

Westinghouse LTV-32w4 HDC - adjustment buttons unresponsive, volume drop, etc.

plug your cable connection to a vcr "in" then run a seperate cable cord from the vcr "out" to your television (which should be on channel 3 or 4) depending on your vcr setting and use the vcr to control the channel so when your westinghouse freezes and becomes unresponsive you could still change the channel and so on through your vcr and tv acts like a monitor works for me. N.B be sure to set the volume and so on before it freezes which could be like a 1min window from turning your tv on
P.S ......................Cardinez
Not finding what you are looking for?

981 views

Ask a Question

Usually answered in minutes!

Top LG Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Kolbrun...

Level 3 Expert

1228 Answers

Are you a LG Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...