Error code E5010 on Canon Pixma MP510 in LCD

Download the user manual to your printer from here. It will have details abot how to change the language.

The error in Canon Printer Error Code B200 indicates a defective print head. A print head is an element that actually allocates the ink onto the paper from the cartridges, which ensures that it is one of the most critical aspects of the printer as a whole. Canon Printer Error Code B200, which can signify a hugely damaging system error, is one of the most feared.

Try these fixes before you go replacing your entire device. Follow this step given below.

1. Restore the doubtful cartridges
2. Extract and clean your printhead
3. Reseat your printhead
4. Check for obstructions

Solution - Canon Printer Error Code B200

Hello

what you need is to clean, you need to clean the prnt head and ink cell, you open the top part let the ink carrier move to the center then UNPLUG the power cord ,now you can easily clean ink cell.

try re-installing the printer drivers

ERREUR B200 SUR IMPRIMANTE CANON PIXMA MP 510

Hi Nick,

On Firefox:

On your browser, type ctrl P. The print option will pop out. Click on Properties, then go to COLOR tab. Under COLOR tab, tick, print on grayscale.

On IE:
It is the same only that you will be clicking PREFERENCES instead of Properties.

Hope this helps!

The printhead always burns out the black first, it's the most used.You will need a new printhead QY6-0070-000, around $50.00

May I know the exact error messages in the printer screen. If it's green and yellow lights that are flashing you need to push more the two cartridges that you replace....also try to clean it using the printer program installed in your computer....good luck and hope it will help....

There should be something like a printer properties menu. Find it and adjust the colour controls to manual and reduce the magenta settings etc. Also make certain you have the right type of paper selected on your printer, to the one you are using.

Try the following: Switch off and unplug the unit, 1) Open the unit and remove the covers that can be removed. 2) now look for any object or blockage in that unit, if none then move the moveable part with your hands, if it moves freely then close the unit after you cleaned it out with compressed air.3) Secure all removeable parts firmly and restart the device. If that doesn't help, I will try and find the correct solution for you.