Kenmore 94812 Top Load Stacked Washer / Dryer Logo

Related Topics:

Anonymous Posted on Nov 17, 2017

I have a Kenmore 417.94812301 Washer/Dryer combo. During the wash cycle, the tub turns counter-clockwise with the agitator. Everything else works fine. But since it turns during the wash cycle, no downward force is created and the clothes do not cycle up and down through the water. What parts do I need to replace? Thank you

1 Answer

Chris Huff

Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

  • Kenmore Master 6,289 Answers
  • Posted on Nov 17, 2017
Chris Huff
Kenmore Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

Joined: Aug 23, 2017
Answers
6289
Questions
4
Helped
2020108
Points
74913

Sounds like a transmission or brake problem. Most likely transmission and brake are both in one assembly

4 Related Answers

Anonymous

  • 1073 Answers
  • Posted on May 08, 2008

SOURCE: Kenmore F/L Washer Model 41743142200 tub loose

you may have a dampening shock that is bad

Ad

douglas smith

  • 1462 Answers
  • Posted on Sep 07, 2008

SOURCE: PAV2300AWW tub spin on wash cycle

fault may be tacho on motor fallen off or round magnet that turns inside the tacho coil has become unscrewed. remove motor and check tacho. it is located at opposite end to the belt pulley

TheMobilian

Dan Webster

  • 8221 Answers
  • Posted on Jan 04, 2010

SOURCE: Kenmore 90 tub spins excessively clockwise during wash cycle.

Improperly installed thrust bearing kit. Too many washers cause the basket to spin during agitation.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Testimonial: "Where is the "thrust bearing kit" and how can it be installed properly?"

Anonymous

  • 176 Answers
  • Posted on Aug 23, 2010

SOURCE: Kenmore Elite Automatic Washer Model #

check the timar

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Speed queen top load washer does not agitate properly

you need to see if the motor turns one direction during wash and the other during the spin. If so, your gearbox is faulty and needs replacement. If motor only goes in one direction at all times, then very possible, the timer is faulty.
2helpful
2answers

Kenmore 90 tub spins excessively clockwise during wash cycle.

there should be 2 or 3 springs that hold it, they mite have broke, take off back panel an check.
0helpful
1answer

Kenmore Washer hums during spin cycle

Either the bearings are frozen, or motor is weakening and has hard turning belt and tub/agitiator
0helpful
1answer

Kenmore stackable washer and dryer

check the belt, pulley, & idler pulley assy.
0helpful
1answer

Kenmore stack washer and dryer

gabehart....sounds like belt is slipping. Replace it. The water pump is on a separate smaller motor so is not affected by the agitator/spin motor.
0helpful
1answer
0helpful
1answer

PAV2300AWW tub spin on wash cycle

fault may be tacho on motor fallen off or round magnet that turns inside the tacho coil has become unscrewed. remove motor and check tacho. it is located at opposite end to the belt pulley
0helpful
1answer

Washer make a clicking noise

Zoobs, you could have something stuck under the agitator. The agitator will pull straight off. Grip it on each side and pull up hard, but don't hit yourself in the face. If that don't work, try slipping a belt under it and pull. Check for something caught under it. Another possibility could be the nylon suspension rod socket supports in the back. They will make a noise during agitation if they are dry. Put a little 3 in 1 oil to quite them down. Take the front panel off and check the pulley and belt, see if anything is out of whack. I also often find the motor support hitting the bottom panel during agitation making noise. Take the front panel off and observe during agitation. See if the support is striking the bottom. If so, just bend the bottom panel down. Catriver..post back.
Not finding what you are looking for?

240 views

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Alexander

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...