Frigidaire FWSB5700DS Top Load Washer Logo

Related Topics:

Posted on Oct 12, 2010

I have a frigidaire fwsb34rgs0 top loading machine. It works through the complete cylce ok but when the spin cycle starts and throughout the spin it makes a loud buzzing/vibration sound. It just started doing this. Would that be the transmission or something else possibly?

1 Answer

Pras

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Sep 12, 2019
Pras
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Sep 12, 2019
Answers
1
Questions
0
Helped
644
Points
1

Hello I have same washing machine & when it starts to spin small black dirt is coming from inside. Tried cleaning it couple of times & also check water hose. When the water gets in the drum water is clean but when it starts rotating black particles come. Not sure of the issue.. can someone share the manual of this washing machine basically to know its Cu ft. Any idea of its capacity & what model replaces it in form factor as the dryer is working fine.
Thanks
Pras

5 Related Answers

Anonymous

  • 213 Answers
  • Posted on Nov 20, 2007

SOURCE: Frigidaire top-load washer Loud noise during spin

its either the upper spin bearing or lower spin bearing. the upper can be replaced by itself but the lower requires the transmission the be replaced

Ad
Coldcut

Karl Whisenand

  • 1554 Answers
  • Posted on Feb 27, 2008

SOURCE: banging tumbler during spin cycle

Be certain that nothing got under the rubber skirt, pull it back and look /feel under it .
inside the tub are the large wiper arms solid and not come loose.
open the top access panel (3 screws in top rear )
and open the bottom access Panel (3 screws in bottom front)
Dissconnect power .
Look at the springs and arms that attach to the tub are they secure.
is the large stone concreate slabs secure.
move all these items and push at them all secure?
you can run it while open but the bottom has a switch on front right that has to be closed.
look watch listen.

Anonymous

  • 156 Answers
  • Posted on Mar 03, 2008

SOURCE: Frigidaire FWT647GHS0 Front Load

you have a bad rear bearing in the rear housing the rear housing is a warrenty part for life on the part but there is parts that should be replaced at the same time expereance guy can do it in about 2 3 hours if not chould be a long hard prosses

Anonymous

  • 6 Answers
  • Posted on Mar 30, 2009

SOURCE: my frigidaire washer model#fwsb34rgs0 stoped

pump not pomping the waterout or yur drians clogged

Anonymous

  • 5 Answers
  • Posted on Aug 02, 2009

SOURCE: My model #gltr1670aso makes loud noises during spin cycle

Usually this is due to either the drum support breaking or the back bearing being bad-neither easy to fix- or worth it. Try lifting the drum up and down, if it moves up and down they are bad. I see this a lot, and the price of repair isn't worth it. Craig

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Frigidaire model # GLMV167OAS Makes a loud buzzing noise during the spin cycle. Completes the cycle but clothes are still sopping wet. What to do???????

Hi,

Problems with a washing machine not spinning or not draining are often interrelated..

If you are having a problem with your top load washer then check out thistip...

Washing Machine does not Pump or Spin


If you are having problems with your front load washing machine then checkoutthis tip...

Front Load Washing machine not draining and or not spinning


heatman101
0helpful
1answer

Kenmore Elite Top Load..Rinse water keeps running in Spin Cycle. Clothes are soaking wet when spin cylce is complete

the fill valve is an electric magnet valve and sounds like it is stuck unplug machine disconnect water lines plug in and when u turn on does it click, if yes then unplug try to slide a long qtip in and if it goes in replace valve
0helpful
1answer
2helpful
1answer
0helpful
1answer
0helpful
1answer

Washer stopped in the middle of the cycle

sounds like motor if nothing stuck between tubs or in pump ,check these first if ok you have bad timer
0helpful
1answer
4helpful
2answers

Frigidaire top-load washer Loud noise during spin

its either the upper spin bearing or lower spin bearing. the upper can be replaced by itself but the lower requires the transmission the be replaced
Not finding what you are looking for?

654 views

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...