Photography Logo

Related Topics:

Posted on May 20, 2008

Downloadable instruction manual for Bell Howell 456 super 8 mm dual movie projector

Seeking a Downloadable instruction manual for Bell Howell 456 super 8 mm dual movie projector. How to load film, change out bulb, etc.

  • 4 more comments 
  • catruhl Oct 14, 2008

    can't load film. instruction needed

  • Anonymous Oct 21, 2012

    We need a manual for a 456A Bell & Howell Super 8...

  • Anonymous Mar 13, 2014

    how to change a button cell battery bell howel

  • Anonymous Mar 17, 2014

    how to replace the battery in Bell & Howell Knighthawk 3 in 1 pen

  • Anonymous Mar 19, 2014

    This is an old projector and 8mm movies we found were probably taken in the late 1940's thru the 1960's. We inherited this projector and would like to see what is on some of the films.

  • Christine Gendron
    Christine Gendron Jun 11, 2014

    I need a manual for the DC5 Fun Flix kids camera.

×

2 Answers

A

Anonymous

Manual for Bell Howell 456 super 8 mm dual movie projector

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Jul 07, 2013
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Jul 07, 2013
Answers
1
Questions
0
Helped
6953
Points
0

I need a manual for a Bell Howell 425 for my parent. Any help would be appreciated....

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
1answer

Bell and Howell 16 mm diagram . don't know how to thread the film

Check this Website and see if one of the manuals doesn't give you the answer:

http://www.paulivester.com/films/projector/BH273man.htm
0helpful
1answer

Bought a Bell & Howell Super 8 projector 481A off EBay and can't figure out how to thread the film.

I found a web (D'Antiques Movie Projectors ) site for an 482a projector which is almost identical to the 481a projector. It had the information I needed.

You also dalled and provided a toll free number at which I may be able to purchase an owners manual.

Thank you

0helpful
1answer

I have a Bell and Howell Model 456 Autoload Super8/Regular 8mm Projector bought in 1969. During projection, when the very end of the advancing film is no longer engaged by the rotating teeth, the film...

The Bell and Howell Model 456 Autoload was made that way ON PURPOSE. The last foot or so must be manually pulled from the projector. As described in the manual, "this safeguard has been designed to prevent the end of your film from flapping against the projector after your movie is completed."
If the entire film was going into the take up reel at the end automatically, then THAT was a defective occurence. It is not supposed to do that.
2helpful
1answer

Belle & Howell Super 8 Projector model 254RS loading problem

Don't have the motor switch in the still position when loading -make sure it is on FORWARD. Look at the little holes in the film and make sure the film is on the same side as the little grooves on the drive gear.
PS -let the bulb cool off before try to move the projector ,the bulbs are very expensive and hard to find.
If you do use the still position to view a frame do it for just a few seconds or the bulb will burn the film. Good luck- Tom.
Not finding what you are looking for?

6,963 views

Ask a Question

Usually answered in minutes!

Top Photography Experts

Brad Brown

Level 3 Expert

19187 Answers

Tony Parsons
Tony Parsons

Level 3 Expert

6405 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66820 Answers

Are you a Photography Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...