How do you put in a fraction to mulitiply it by another fraction?

Multiplying Fractions:

1. Make sure you're working with two fractions.
2. Multiply numerator x numerator, then multiply denominator x denominator.

Dividing Fractions:

1. Make sure you're working with two fractions
2. Flip the second fraction upside down.
3. Change the division sign into a multiplication sign.
4. Multiply top x top and bottom x bottom.

Converting Mixed Numbers into Improper Fractions:

1. Convert mixed numbers into improper fractions.
2. Take the whole (non-fraction) number and multiply it by the denominator.
3. Add that answer to the numerator.
4. Put that amount over the original denominator and you will have an improper fraction.

Method for Adding and Subtracting Fractions:

1. Find the lowest common denominator (bottom number). For both adding and subtracting fractions, you'll start with the same process.
2. Multiply fractions to match the lowest common denominator.
3. Add or subtract the two numerators (top number) but NOT the denominators.

Put the integer part on the same denominator as the fraction part. Combine the two numerators, and simplify if possible.

Multiply the integer portion by the denominator of the fraction, add the numerator of the fraction, and put the result over the denominator.

If you're asking how to do this automatically on some calculator, what make and model?

Multiply the integer portion by the denominator of the fraction, add the numerator of the fraction, and put the result over the denominator.

If you're asking how to do this automatically on some calculator, what make and model?

To Enter a basic fraction just enter the first number, then a division sign, then the second number. So two thirds would look like "2/3" (Without quotes). For more complicated fractions you may need to put parentheses for the left and/or right of the division sign like in the fraction (5+2^4)/(2-8). To get the calculator to show it as a fraction you would enter the fraction, then press (Math) then (1:Frac). So the input on your screen should look something like this "2/3>>Frac" (Without Quotes, and >> being a filled triangle pointing at the word Frac). From your post it sounds like you were putting the fraction last when it should have gone first.

1. Enter a numerator
2. Press [/] for division
   
3. Enter the denomoinator
4. Press [MATH]
5. Press [1:|=>Frac]
6. Press [ENTER]
   

Keep in mind that the fraction that will be displayed will be a fraction reduced to its simplest form.

To convert a fraction into a decimal number Press [Math][2:|=>Dec].

The fraction symbol is ab/c
All scientific/graphics calculators have a fraction key. Going by the picture I would assume that calculator would have it

for my 82 i put my fraction in parentheses then press MATH and scroll to >FRAC

You just use the division button and it helps if you put the fraction in parenthese. So if you were trying to put in 1/4 you would enter 1 then the division button then 4. Voila!

When performing the calculations, put the fractions in parentheses. Then once you get your answer, press 2nd and Math (above the times button). Then press F5, MORE, and F1. It will have Ans Frac>. Then hit Enter and it'll change it to a fraction.