Hi We have a u line model B 198 ice maker that the thermostat is faulty.There are no spares available in South Africa,do you have any suggestions that we could use as a replacement?Would a Danfoss stat work with a warm in 3.5 /-11 deg C with a auxillary signal?

Ginko

• 19396 Answers
• Posted on May 27, 2008

SOURCE: u-line bar refrig/icemaker

The fact that the compressor is two years old does not mean it cannot break down again, give more details on the problem to troubleshoot further

SOURCE: how to replace the ice maker unit.

I just RR'd mine. Undo the three screws on the bottom of the metal piece that the ice maker sits on, then the two screws that are horizontle above the . Take of the back, withdraw the termocouple from the tube that goes through the foam, clip the wires (5) leaving enough of a pigtail to crimp a **** splice to the new ones. Withdraw the fill tube. Don't lose the clay that seals the holes through the insulation. Withdraw the ice maker by gently twisting and pulling straight out. Replace in reverse order. Getting the screws back in is a little tricky.

SOURCE: I have an old U-line ice maker. I can not find

The mechanical parts of those models is the same as a BI 95 or BI98. If your looking for the faceplate that would be part number 150. This includes the timer motor,gears,water switch, and hold switch. You can order this thru a parts distributor. Appliance Parts Depot or All Brand Parts should be able to help. If you want to replace the complete icemaker assemly that part number is 402

SOURCE: ice maker stopped working

If you manually advance the ice and when the ejector blade reaches 10 oclock that when it calls for water. You should hear the valve come on. If not it could be a bad water valve. Part#2552A or you might want to doublecheck to see if your getting voltage there when the blade reaches 10 oclock. If no voltage then the water switch is bad.

SOURCE: replacement ice bucket for the U-Line Ice Maker

U-Line 800-779-2547