Hp pro k8600 does not print a3 scale
I have had this same problem too, trying to print on 11x17 and found this solution. Works perfect.
Go to Printers
Double Click on the K8600
Double Click on Customize your printer
Click on Advanced tab
Click on the Print Processor button
Set Print processor to winprint, and Default data type to RAW
hi thanks it works
Thanks a lot ... you were the only one to give this solution :)
Thank you so so much, you were the only one to give the right solution <3 Thank you again
×
How to Fix HP Officejet Pro 8600 Error code 346, when trying to fax a document?
The HP Officejet Pro 8600 Error code 346 usually occurs, when you are trying to fax a document. This error depending on your HP printer, a fax system might fail to work with the 8600. Most likely the issue is with the individual location which you are attempting to fax. It could happen due to Remote machine (the person you are faxing) failed to respond.
The reason of the remote machine failed to respond to a fax command from the local machine because the connection was interrupted. So, these errors can happen various reasons includes, if the phone lines in the area to be faxed are old, line condition, line traffic, power outages, and other power-related problems. Then don't worry about anything, we are here for your help. Our blog will help you to provide various methods on how to fix HP Officejet Pro 8600 Error code 346.
Steps to Fix HP Officejet Pro 8600 Error code 346:-
Step1: Retry the Fax Reception
You should retry the fax reception at a different time when the telephone line conditions have improved. Then call the telephone provider to solve the line problem.
Step2: Disable ECM.
Try to disable ECM. Might be error still occur, and may result in a degraded image quality on the received page. Therefore, the ability to send the entire document will be improved.
Step3: Sending at a lower transmission speed
Have the sender send at a lower resolution. If not, then you should try sending at a lower transmission speed.
Follow these steps to Lowering Fax Speed on an 8600:-
·Go to the home screen and then press the 'Right Arrow'.
Epson Printer Support Phone Number 1 800 213 8289 Tech Support
·Then pick up the 'Setup' menu.
·Choose the 'Fax submenu'.
·Then, scroll down and then choose 'Advanced Fax Setup'.
·Now scroll down again to Fax Speed, and set the speed to slow like 9600. Step 4: Resend Document
Make sure, if your document is large, and then ask the remote user to re-send the document, as divided into two or more smaller documents.
For further any problems related to HP Printer errors, do call us at our HP Customer Support section for instant solution & service.
Yes, it doesn't, look it up over here - Hp Officejet Pro K8600 Manual
3,234 views
Usually answered in minutes!
×