Need extra bracelet lings for a Tag Heuer Indy 500

try the link below
http://www.youtube.com/watch?v=GvAEU7xRGsk&feature=related

Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all TAG HEUER watch manuals. Rate me, please.

are you sure you didn't just stop the chronograph?

Might need cleaning, oiling or other servicing ...

What do you think?

Thanks for your interest in FixYa.com

You can usually find them on ebay.

u need to go to a store that carries tag. go to tags web site and find locate store. if they dont stock the bracelet they can order one in. might be pricy

Unscrew the crown like you are setting the time. Make sure the time shown on the watch is not around 12 o'clock. If it is change the time to around 6 o'clock.

Then pull the crown out to the first click. Turn the crown to advance the date. When finished push the crown back in and screw it down tight.

Hope this helps,
Ken
Yellowstone Watch Inc.

TAG Link watches has very distinctive bracelets, but there is the price to pay for it- as they do wear out it's almost impossible to repair and costly replacement is needed.
In your case: open the clasp first and check if the bracelet end links has holes on sides. If yes, then find which end of the pin is split or have groove in it. This end Must come out first! Use small hammer and hardened steel pin to drive bracelet pins out.
When assembling bracelet back together, note that the pins MUST go back exactly the same way as they came out (blunt end first in and split end last).

Good luck

Arthur

Have a look at bracelet clasp exetnder from RTL Watches