Zanussi ZWF1430W Front Load Washer Logo
Posted on Apr 23, 2008
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Zanussi washing machine wont spin

I have a Zanussi Aquacycle washing machine and the drum wont turn during the wash cycle, I can manually go in and turn drum both ways but when on programme it makes the spinning noises but doesnt do anything, not sure if its filling up with water either now...Help

Answer This Question
  • 2 more comments 
  • Anonymous Mar 21, 2014

    drum rotates fine,but on spin drum does not turn and rattle noise at back of drum,Found what looks like a very thin belt broken on floor of machine.How do you get to belt to inspect it

  • Anonymous Mar 26, 2014

    washing machine fills with water but drum wont turn to wash or spin

  • Anonymous Mar 28, 2014

    the washing machine drum fell down and unit turns off on its own when spinning

  • Anonymous Apr 01, 2014

    The centre part of my machine is only turning not the drum so it does not spin and now it doesnt want to wash

×

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points
Hot-Shot:

An expert who has answered 20 questions.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.

  • Expert 101 Answers
  • Posted on Apr 23, 2008
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points
Hot-Shot:

An expert who has answered 20 questions.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.

Joined: Apr 21, 2008
Answers
101
Questions
0
Helped
34754
Points
216

Check the drain hole when you start the machine if the water is coming back out , if yes that means your dump valve is bad.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Zanussi aquacycle 1200.After a wash has finished and i empty washing, reload again,it wont start and none of the lights come on.eventially it works ok again after a good 5-10 mins.
you have probably done no harm. try selecting spin and drain again to ensure the water has drained properly.
Machine starting on its own after 5 minutes or so is usually the door lock failing, again not caused by your actions.
Read full answer
Sep 05, 2016 • Zanussi Washing Machines
0helpful
1answer

I have a Zanussi Aquacycle 1000. It is taking in water and draining but the drum does not rotate both during wash cycle and spin cycle. Urgent help needed as we have people staying from England and NO wash...
Hi.

If the machine is filling up, then cycling and draining, the problem is usually the belt. The belt is reached disassembling the appliance . If the belt is OK the problem is usually the motor or the motor control unit, which is a sealed electronic module connected to motor and to control board and located inside the washer. If the motor has volts and does not turn, then the motor must be replaced. In some less common case the control module itself may be responsible. Motor assembly and belt are located at the back of the drum and get accessed disassembling top and back of the washing machine.

If the machine does not go through the cycle, but it starts draining from start, then the problem is overfill detected. In that case check the drain system, the drain hose, the inlet valve and the pressure switch.

Regards.

Ginko
Read full answer
Aug 29, 2011 • Zanussi FJS1225W Front Load Washer
1helpful
1answer

Zanussi electolux aquacycle 1200 w/mc wont spin
Try new bushes and make sure where bushes run is clean and free from carbon H
Read full answer
Jan 09, 2010 • Electrolux Washing Machines
0helpful
1answer

Drum wont turn on the spin cycle, it's ok on a
if its pumped all water out and wont spin sound like your motor brushes are worn.
Read full answer
Oct 16, 2009 • Zanussi ZWF1230W Front Load Washer
8helpful
1answer

When my zanussi aquacycle 1200xc is on the fast spin cycle the spinning drum seems to be getting noisier of late.
Probably the main bearings are going, spin the drum by hand, there should be little or no noise at all, if it feels rough, or noisy, then bearings are failing.
Please rate my solution.
Thanks.
Read full answer
Oct 10, 2009 • Zanussi F1245W Front Load Washer
3helpful
1answer

Zanussi Aquacycle Washing Machine wont spin?
Assuming its pumping out ok, sounds like motor brushes..if not pump clear filter..
Read full answer
Oct 06, 2009 • Zanussi ZWF1430W Front Load Washer
1helpful
1answer

No spin & drum is very noisy during cycle ,like a jet engine
Sounds like the drum bearings have gone and the belts come off.
Im afraid this is an expensive repair and not a diy job.
Sorry to be the bearer of bad news.
thankyou for using Fixya.
Read full answer
Mar 15, 2009 • Washing Machines
0helpful
1answer

Zanussi aquacycle 1200 drum not turning
is the belt ok?
Read full answer
Oct 18, 2008 • Zanussi FJS1225W Front Load Washer
4helpful
2answers

Zanussi aquacycle 1000 washing machine spin problem
this is possible due to a bearing collapse or bearing spider broken. this causes drum pulley to be out of line and the belt comes off
Read full answer
May 29, 2008 • Zanussi FJS1225W Front Load Washer
0helpful
1answer

Zanussi aquacycle 1200
May be the Bearings.Open door and try moving drum, hold at top of drum and pull foreword and back if drum loose main bearings gon. Replace bearings.

Slim Jim
Read full answer
Oct 28, 2007 • Zanussi FJS1225W Front Load Washer
Not finding what you are looking for?

View Most Popular

ZWF1430W Front Load Washer

  • Washing Machines

Related Question

Zanussi aquacycle 1200.After a wash has finished and i empty washing, reload again,it wont start and none of the lights come on.eventially it works ok again after a good 5-10 mins.

  • Zanussi Washing Machines

Related Topics

1,470 views

Ask a Question

Usually answered in minutes!

Popular Questions

I left the transit bolts in our

Zanussi ZWF12070 Front Load Washer

Zanussi Electrolux ZWF 1430 W (E20 error)

Zanussi ZWF1430W Front Load Washer

Zanussi zwf1430s error codes - E40 / E41 & ELE

Zanussi ZWF1430W Front Load Washer

E10 code on a zanussi jet system washer

Zanussi WJS1265W Front Load...

Start/Pause light flashing but machine won't start

Zanussi FLE1416W Front Load Washer

Top Zanussi Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Kolbrun...

Level 3 Expert

1228 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. ZWF1430W Front Load Washer Manual

ZWF1430W Front Load...

Loading...