Error message F1-1 what does it mean?

Question 1

0helpful

2answers

What does error code 168 mean?

what make and model printer is it?

Feb 14, 2016 • Office Equipment & Supplies

1helpful

1answer

Why does my treadmill stop after a few seconds then error code E1 displays. What do i do?

Replacement Parts for Fitness Exercise Equipment at SPORTSMITH

True Treadmill Errors and Service Messages

The True 600, 700, 725 and 750 series treadmills are equipped with built-in diagnostics and maintenance reminders that display either an error message or service message as they occur.
The error messages that may be displayed by the built-in diagnostics are as follows:
- E1:INCLINE
- E1:MINIMUM
  - This is a minimum incline calibrating error that can be cleared by calibrating the incline.
- E1:RANGE
  - This means the difference between the treadmills zero position and maximum incline is not sufficient.
- E1:STALL
  - This means that the incline is not moving when it has been commanded to.
- E2:OVERSPEED
  - This occurs when acceleration greater than 2.1 mph occurs as this is greater acceleration than anticipated.
- E2:CAL
  - This means feedback cannot reduce or increase speed to target and error can be cleared by calibrating treadmill.
- E3:EEPROM
  - This error happens when a data error is detected on the EEprom. The control panel needs replaced if this error occurs.
- E5:SENSOR
  - This error occurs when there is no speed or RPM feedback detected from speed sensor.
The service messages that may be displayed by the built-in maintenance reminders are as follows:
- S1:LUBE
- S2:CLEAN
  - This service message displays every 500 miles and is your prompt to clean the treadmill.
- S3:MOTOR
  - This service message displays every 2500 hours and is your prompt to check the motor brushes.
This information should help you understand the cause of the error message or code and how to take action to repair your True treadmill

Errors for True Treadmills E5 Sensor E2 Cal S1 Lube and more

Oct 12, 2015 • Exercise & Fitness

0helpful

1answer

WHAT DOES ERROR MESSAGE 1E MEAN AND HOW DO WE FIX IT?

On LG's, a 1E error message usually means there is a problem with the water inlet valve. Check your shutoff valve under the sink, first, just to make sure someone didn't accidentally turn it off. If it's on, then it's most likely the water inlet valve located under the dishwasher.

Oct 18, 2014 • LG Dishwashers

0helpful

1answer

What does error message number 9 mean on my kymco mini s mobility scooter?

hi, it's a controller trip error message this can mean a bad connection or at worse a controller fault ...

Regards
Rob

May 05, 2014 • Health & Beauty

0helpful

1answer

Janome MemoryCraft 6500. What does error message "BM init error" mean? What does it take to fix it?

That's an initiation error. I would call Janome direct and ask them.

Dec 02, 2012 • Sewing Machines

3helpful

1answer

Error code OFOO:O75D error:OFOO:O244

Is this from a blue screen error ?

A "STOP" MESSAGE in white letters behind a blue background?

If it's a sata message (hard drive error message), this means that your harddrive is dead or about to die. Most likely its already dead, this error means also that the harddrive cant be read anymore.

Mar 05, 2010 • Dell Inspiron 1501 Notebook

0helpful

1answer

When i install cd it says error 6 on my clarion dxz465mp

Clarion Audio error codes:

Error Codes:

Error 1 Battery inside CD Changer needs to be replaced.

Error 2 CD error message. Mechanism has as eject problem or takes a long time to select CD.

Error 3 CD error message. The pick-up is out of focus during play mode due to scratches on the disc or contamination.

Error 4 Connection problem. Reconnect the data cable.

Error 5 CD error message. Could not read correct data due to CD ROM.

Error 6 CD error message. Could not read data from disc because it is upside-down.

Error 8 Tape Drive system defective. Eating tape or something wrong with the drive system.

Error 9 Weak RF. Try alternate frequency

Even though it says error 6 is an upside down cd, it just means the disc cant be read. usualy means the laser is dirty, out of adjustment, or not working.

Aug 19, 2009 • Clarion DXZ465MP CD Player

2helpful

1answer

TE message. machine turns on but nothing else. I found out the message means a thermastor problem

Perhaps the error is "[-E" and it means the thermistor is out of error. Replacing it will correct the problem

Apr 27, 2009 • LG WM2277H Front Load Washer

0helpful

2answers

Help Toshiba E-Studio 162 Copier error

how can I reset the Toshiba estusio162 without calling for maintenance

Sep 03, 2008 • Toshiba e-Studio162 Copier

0helpful

3answers

Jenn-air Oven Model W256W

just scroll down on this e mail and in the comment box you can answer my question

Feb 14, 2008 • Jenn-Air JGW8130A Electric Single Oven

Question 2

Michael Thomas

Maytag Master 3,056 Answers
Posted on Jul 19, 2010

Michael Thomas

Maytag Master

Joined: Aug 09, 2008

Answers

3056

Questions

52

Helped

1307684

Points

10935

Hello there:e:
This is a very common error code for these ovens this means that the oven temperature sensor is bad and needs to be replaced
You can get these from your local appliance parts repair center if you have one in your town or order it online thru repair clinic.com
it looks like this.
error message F1-1 what does it mean? - cd69e94.jpg

Furthermore here is the price and the part number
Part 1364 // Item #
1364 Price
$35.70 In Stock?
Yes Qty

Order now and this item will ship today. Or it's FREE! Back Oven sensor kit, 6 inches long. Includes two harness adapters for a variety of applications and installation instructions.

Anonymous Sep 24, 2010

I have Maytag duo oven(MER6770), that stop heating both oven, error f1-2 is showing. I change top oven heat sensor and both oven start working when I tested. When I try to use top oven next day it heated up to 450 F,just like I set it up, and stop working again, showing same error message F1-2, beeping like crasy, Can you tell me what's going on with my oven please.Thank you. Eva

×

Related Topics:

Trustworthy Expert Solutions

Error message F1-1 what does it mean?

1 Answer

Michael Thomas

Add Your Answer

Attachments: Added items

Related Questions:

What does error code 168 mean?

Why does my treadmill stop after a few seconds then error code E1 displays. What do i do?

WHAT DOES ERROR MESSAGE 1E MEAN AND HOW DO WE FIX IT?

What does error message number 9 mean on my kymco mini s mobility scooter?

Janome MemoryCraft 6500. What does error message "BM init error" mean? What does it take to fix it?

Error code OFOO:O75D error:OFOO:O244

When i install cd it says error 6 on my clarion dxz465mp

TE message. machine turns on but nothing else. I found out the message means a thermastor problem

Help Toshiba E-Studio 162 Copier error

Jenn-air Oven Model W256W

Not finding what you are looking for?

MER6772 Gemini Electric Kitchen Range

What does error code 168 mean?

Ask a Question

Top Maytag Kitchen Ranges Experts

vince

Cindy Wells

Brad Brown

Are you a Maytag Kitchen Range Expert? Answer questions, earn points and help others

Manuals & User Guides

Related Topics:

Trustworthy Expert Solutions

Error message F1-1 what does it mean?

1 Answer

Michael Thomas

Add Your Answer

Attachments: Added items

Related Questions:

What does error code 168 mean?

Why does my treadmill stop after a few seconds then error code E1 displays. What do i do?

WHAT DOES ERROR MESSAGE 1E MEAN AND HOW DO WE FIX IT?

What does error message number 9 mean on my kymco mini s mobility scooter?

Janome MemoryCraft 6500. What does error message "BM init error" mean? What does it take to fix it?

Error code OFOO:O75D error:OFOO:O244

When i install cd it says error 6 on my clarion dxz465mp

TE message. machine turns on but nothing else. I found out the message means a thermastor problem

Help Toshiba E-Studio 162 Copier error

Jenn-air Oven Model W256W

Not finding what you are looking for?

MER6772 Gemini Electric Kitchen Range

What does error code 168 mean?

Related Topics

Ask a Question

Popular Questions

Maytag Gemini oven glass door panels impossible to clean

Maytag electric range door handle (how to replace?)

Baking Element Caught fire

Maytag Gemini Electric stove fault code F 1-2 when using the oven(s)

Error code 5A6 on Maytag oven MER5755QAB

Top Maytag Kitchen Ranges Experts

vince

Cindy Wells

Brad Brown

Are you a Maytag Kitchen Range Expert? Answer questions, earn points and help others

Manuals & User Guides