Casio aw-s90, analogue and digital time are not in sync. The analogue is about 2hr 25mins behind

If old model ana-digi watch you have to manually synchronize analog time with digital display.

Use this page to download a copy of CASIO watch manuals in PDF format. To download a PDF file, enter the four-digit (or three-digit) module number marked on the back cover of your watch. There are pics to show where the module number is found.
Timepieces Watches Manuals CASIO

press and hold adjust button until digits flash (the digit that flashing is changeable by reverse and forward) mode is to choose what you are about to change. if your done with the digital time, press adjust once. for analogue time: press mode button until it reaches the word "H.SET" press and hold the adjust button then the word H.SET replaced by the time that you had been set for the digital time. then you can now use the reverse or forward to set the analogue time. if your done press the adjust button once then the mode button once. i hope i had been helped you.

If you cannot find the automatic way of setting the hands, you can manually reset the analogue hands by pressing the mode button until you reach the "HS" mode and using the 2 or 4 o'clock buttons to adjust the hands.

you can get
instructions from the Casio web site.

Go to the casio web site "casio.com".

Select "support" and the "manuals",
watches;

Accept terms


Select "watch manual archive"

Read the number of the back of your watch and enter it into the search box

I presume that the model you have is an analogue/digital watch and the hands are out of sync with the digital display.

You can download instructions for your watch by going to "casio.com", selecting "support", then "manuals", from the next list Select "watches", agree terms, and then "watch manual archives".

Enter the number off the back of your watch into the box anf then click on search.

Download the manual.

To set the analogue to the digital time press the mode button (lower left until "HS" appears. Then use the two buttons on the right to advance or ****** the hands.

(these instructions are for my watch but I think that your will be the same. If not, go to the Casio web site (casio.com) select support, manuals, watches, agree terms and then watch manuals archive; fill in your watch details and download full instructions.

Follow this link:

http://world.casio.com/wat/download/en/manual/

Rate, please.

Digital time must be set using pushbuttons on watch case sides. One of them is for MODE, another for SETTINGS.
Mode button usually must be held pushed in for a while to start to work and the digits should start to flash - only then you can start to reset your digital watch using another (settings) button.
Use small steal pin to push these buttons.
If nothing happens, you will have to consult your nearest watch repairer as in this case there is a mechanical or electronical fault.
Rating is very appreciated.

To set the analog time to match the digital time...
There are 4 buttons: top left=A, top right=B, lower left=C, lower right=D

Get the watch in timekeeping mode (where it shows the digital time or date)
Press C six (6) times
Hold down A until the current digital time begins to flash
Press D repeatedly to advance the analog time, one minute at a time.

If you need to advance the analog time at high speed, HOLD D DOWN.

To return to regular timekeeping mode, press C

Set the digital time so that it matches the analog time, since you can reset the seconds easily.