Have Onkyo remote trying to program by Samsung

The Onkyo RC-649M remote was included with the Onkyo HT-S790 (with the HT-R540 receiver), among other sound systems. The directions for using this remote are thus in the HT-S790 manual. Onkyo has this manual here: https://www.intl.onkyo.com/downloads/manuals/pdf/ht-s790_manual_e.pdf . See pages 13-17 for information on using the remote. Look at page 69 and the subsequent pages for the remote control programming directions and code list. To program the remote for a specific device, press and hold the Mode button (TV, DVD, etc) that you want to program. While holding this mode button, press and hold the Display button (the lowest button on the left side of the remote) for 3 seconds. Then enter the 4 digit code that applies for your device/manufacturer. (If there are multiple codes, you will need to test the remote and try again until you find a code that works.)

I hope this helps.

Cindy Wells

Your Onkyo TX-SR304 receivers remote (RC-645S) is not capable of controlling devices by other manufacturers. It controls only Onkyo devices.
Other Onkyo remotes do have universal remote functionality and you can download Onkyo remote codes here.

I hope that helps.
________________________________________
Download Onkyo TX-SR304 users manual here.

would like to unlock remote code for dvd-hd747

This should help you.
http://codesforuniversalremotes.com/samsung-blu-ray-player-remote-control-codes/

Just go to Onkyo.com support.. all the manuals are online in pdf form

There is a lot of information on this site. Not all models can be changed. http://www.dvdhelp.com/


Jerry G.

This works to change region code 5.
This is how it works.
1)Power on player.
2)Ensure that there is no DVD inside the player.
3)The tray should be closed.
4)Press "Subtitle" on the remote control.
5)Press 53814 for region 5 (For other regions see any of the other cracks)
6)The region code 5 will be displayed on the left top corner of your screen.
7)Now press 9. A 9 will be displayed on the top left corner of the screen.
8)Press Subtitle on the remote again
9)Power off the player.
10)Power it on again and you are region independent!!
Worked for me.

this player is known for not being able to be downgraded. The player needs to see a .bin file and there is remote code to input to flash it.