Where is the equal sign on the ti 84 plus - Texas Instruments TI-84 Plus Calculator

SOURCE: graphing multiply equations

When you go to Y=, you should get a list that says:
Y1=
Y2=
Y3=
etc. You just enter the first equation into the Y1= space then hit ENTER and it will go to Y2=. Enter the second equation there. After you have entered all of your equations, push GRAPH and they should come up in order but they will all appear.

Also, make sure your window is set appropriately so that you are able to see all of the graphs.

Lastly, when you look at your Y= screen, are there funny looking arrows before the Y=? If so, do this:

SOURCE: I do not know how to find the greater than and

press 2nd, then math. It will bring you to a menu with =, not equal, >, <, and that kind of stuff

SOURCE: My TI-84 Plus won't graph two functions at once.

Hello,
Turn the satistical plots OFF
Press [2nd][Y=] (STATPLOT). Select or enter 4: to execute the command [PlotsOff] [ENTER]

Clear the lists (statistical lists)
Press [2nd][0] (Catalog]. Press [PGRM] C. The cursor jumps to the first command in catalog that starts with C (The greek letters in names do not matter). Scroll down a bit to reach the command [ClrAllLists]. Select it and press [ENTER].

Try your graphs again.
If you still have problems, just reset the RAM:
Press [2nd][+] (MEM). Press 7 to select [Reset] then [1:All Ram][2:Reset]. Press [Clear] to erase the Ram Cleard message.

Now you should be able to draw the graphs.

Hope it helps.
Thanks for using FixYa.