PHILIPS DVD player 616K, how to change region or get into right region. my player was working OK. Suddenly it stopped functioning and showed/diplayed '' wrong region'' on the TV screen.

Go to the forum of videohelp, and then go to the DVD hack section. You can check more solutions here:
3 ways on how to make your Blu-ray player region free

If not, you can use Leawo Blu-ray Copy to remove the region code on the disc.

Changing the region code for DVD616K :

1. Press OPEN/CLOSE, and wait for the tray to open.

2. Use the remote control to input digital key '1', '1', '1', '0' in that order

if that dont work go 1, 1 1, 1 in that
order.
Kindly leave a few seconds between each entry, the microprocessor is slow
with these entries.
3. Press number '7', '8' or '9' to display the current region code of the DVD
player.
OR
4. Press any number of '0' to '6' to set the required region code. The OSD
will display the new region code of the DVD player.
5. Region '0' will be the setting for multi region
6. The region setting will be saved in the FLASH memory.
7. Press OPEN/CLOSE again, the DVD player will return to normal operation.


note: you want to chose region 0 so u can use all regions