Konica Minolta 5430DL second tray - print dialogue

Question 1

0helpful

1answer

Tray 3 is set for 8.5 x 11 paper but is saying to set tray 3 to correct paper size which is 8.5 x 11 so it won't let me print. What can I do to fix this?

Check the paper type. If its not set for plain it will not work.

Oct 15, 2014 • Konica Minolta bizhub Office Equipment &...

0helpful

1answer

Printer is only printing to the bypass tray instead of tray 1 where it should be printing

First, check your printer properties and make sure you are not telling it to go to the bypass tray.

If you are set to auto tray and its still trying to pull out off bypass tray. Check on the copier to make sure tray 1 isn't set for a special type of paper. If it is, change it to plain paper.

Sep 30, 2014 • Konica Minolta Bizhub C451 Copy-print-scan

0helpful

1answer

I see where to change color density settings in thick paper. Can I do this for plain paper? (Normal printing is too dark.)

The only changes you can make are in the printer preferences menu, so if you have lightened it up there you have made the only adjustment allowed or provided for.

Jan 20, 2012 • Konica Minolta Bizhub c203 Copier

0helpful

1answer

Can I print envelopes on my Bizhub 250

BYPASS TRAY is sed when printing onto paper with a size not loaded into a paper tray or onto thick paper, overhead projector transparencies, postcards, envelopes or label sheets Can be loaded with up to 150 sheets of plain paper, 50 overhead projector transparencies, postcards, label sheets or sheets of thick paper, or 10 envelopes referred to as the "bypass tray" throughout the manual. (See page 2-60....ATTACHED )
ftp://207.18.56.26/software/BPG/Userbizhub200250350CopyOperPh2_5.pdf

Feb 15, 2011 • Konica Minolta bizhub 250 All-In-One Laser...

0helpful

1answer

Konica Minolta 5430dl wrinkles paper when printing. How do I fix?

suggestions= check the tray, that papers are properly inserted in the tray, papers should be moist free, this problem can also be caused by dusty pickup rollers, which picks the paper and also due to fixing unit problem.

Apr 21, 2010 • Konica Minolta magicolor 5430 DL Laser...

1helpful

1answer

How do I print 8-1/2" x 14" paper. I only have one 8-1/2" x 11" tray? Konica Minolta Magicolor 5430DL

On the 5430 DL there is an aux legal tray that can be purchased for legal printing. On a later successor the 5550 a manual feed option was included, however for the 5430 there is no option for printing legal without the extra tray being installed. On a side note, I have this tray and when not printing legal it lets me load an extra 500 sheets of letter paper which is very convenient when I need to print a bunch of sheets overnight.

Mar 15, 2010 • Konica Minolta magicolor 5430 DL Laser...

0helpful

2answers

KONICA MINOLTA magicolor 5430DL don't recognize paper

The machine keeps track of what paper was reqested last, and asks you to change paper if the new job is different. I get the "put media" message and have to open and close the drawer if my next print job requests a different paper. So I suggest you gently open and slam the drawer a couple of times, or see if you can find the sensor switch that monitors whether the drawer is open. Also check if your paper guides in the drawer are clicked in place.

Sep 03, 2009 • Konica Minolta magicolor 5430 DL Laser...

3helpful

1answer

Konica Minolta paper mismatch problem

make sure that you specify the same paper size in the print dialogue window - i.e., in MSWord go file - print - properties - and make sure paper size in the dialogue box matches media type in printer tray

Mar 20, 2009 • Konica Minolta magicolor 5430 DL Laser...

3helpful

1answer

Paper Tray Settings

You have Auto Tray Switching acticated (ATS). Unless you specify each tray/paper with different settings it will switch.

Go in to the utility menu and you can find this in the paper tray settings area I believe.

You can turn this off completely to avoid this in the future.

If you look around you can even just tweak the settings for this, but in your case i would just shut it off.

May 30, 2008 • Konica Minolta bizhub C250 All-In-One...

2helpful

3answers

Konica minolta 5430dl colour printer

13D0H: Parameter Chip failure

Unplug the power cord and plug it in, then turn
OFF and ON the Power Switch.
the PWB-A may be faulty.

May 21, 2008 • Konica Minolta magicolor 5430 DL Laser...

Question 2

Anonymous

Master 1,049 Answers
Posted on Nov 08, 2009

Anonymous

Master

Joined: Jul 23, 2008

Answers

1049

Questions

2

Helped

286721

Points

2705

This needs to be setup through the computer using the printer properties, not through the printer. You will need to be the local admin to make the changes. You may also have to go under advance and manual specify the tray and component types. The printer will not allow you to set options for trays and components that are not enabled or detected. Let me know if you need a step-by-step.

Testimonial: "2d tray is recognized, print dialogue allows me to click Glossy, but then says CONFLICT and resets to plain paper.Ideas?"

Anonymous Nov 08, 2009

You should have a component chooser under the printer properties, I can get you a screen shot tomorrow. I'm not at work today.
Anonymous Nov 09, 2009

These do not auto-detect well. Make sure they are manually set.

Then make sure you select paper type on the paper tab.

×

Related Topics:

Konica Minolta 5430DL second tray - print dialogue

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

Tray 3 is set for 8.5 x 11 paper but is saying to set tray 3 to correct paper size which is 8.5 x 11 so it won't let me print. What can I do to fix this?

Printer is only printing to the bypass tray instead of tray 1 where it should be printing

I see where to change color density settings in thick paper. Can I do this for plain paper? (Normal printing is too dark.)

Can I print envelopes on my Bizhub 250

Konica Minolta 5430dl wrinkles paper when printing. How do I fix?

How do I print 8-1/2" x 14" paper. I only have one 8-1/2" x 11" tray? Konica Minolta Magicolor 5430DL

KONICA MINOLTA magicolor 5430DL don't recognize paper

Konica Minolta paper mismatch problem

Paper Tray Settings

Konica minolta 5430dl colour printer

Not finding what you are looking for?

Magicolor 2530 DL Laser Printer

Tray 3 is set for 8.5 x 11 paper but is saying to set tray 3 to correct paper size which is 8.5 x 11 so it won't let me print. What can I do to fix this?

Ask a Question

Check Out the Latest Printers Report

Top Konica Minolta Office Equipment & Supplies Experts

Norman Weimar

Cindy Wells

ZJ Limited

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Manuals & User Guides

. Magicolor 2530 DL Laser Printer...

Related Topics:

Konica Minolta 5430DL second tray - print dialogue

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

Tray 3 is set for 8.5 x 11 paper but is saying to set tray 3 to correct paper size which is 8.5 x 11 so it won&#39;t let me print. What can I do to fix this?

Printer is only printing to the bypass tray instead of tray 1 where it should be printing

I see where to change color density settings in thick paper. Can I do this for plain paper? (Normal printing is too dark.)

Can I print envelopes on my Bizhub 250

Konica Minolta 5430dl wrinkles paper when printing. How do I fix?

How do I print 8-1/2" x 14" paper. I only have one 8-1/2" x 11" tray? Konica Minolta Magicolor 5430DL

KONICA MINOLTA magicolor 5430DL don't recognize paper

Konica Minolta paper mismatch problem

Paper Tray Settings

Konica minolta 5430dl colour printer

Not finding what you are looking for?

Magicolor 2530 DL Laser Printer

Tray 3 is set for 8.5 x 11 paper but is saying to set tray 3 to correct paper size which is 8.5 x 11 so it won&#39;t let me print. What can I do to fix this?

Related Topics

Ask a Question

Popular Questions

Hp 4250n, 49.4c06 service error

Waste bottle full...can i empty it and how??

Windows 7 drivers for minolta magicolor 2300dl?

Konica Minolta 2490MF - Paper size error

Konica minolta size media error

Check Out the Latest Printers Report

Top Konica Minolta Office Equipment & Supplies Experts

Norman Weimar

Cindy Wells

ZJ Limited

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Manuals & User Guides

. Magicolor 2530 DL Laser Printer...

Tray 3 is set for 8.5 x 11 paper but is saying to set tray 3 to correct paper size which is 8.5 x 11 so it won't let me print. What can I do to fix this?

Tray 3 is set for 8.5 x 11 paper but is saying to set tray 3 to correct paper size which is 8.5 x 11 so it won't let me print. What can I do to fix this?