I have a samsung scx 4200 am getting the papaer jam error even when theres no paper jamed up there

Clear all paper jams from the front and the back areas inside the printer. Then, turn off and restart. It should reset itself.

I suppose that the exit paper sensor in fusing section is broken (ussually when you pull out paper jam you can brake this little black or blue pawl). You can order and buy only this paper sensor pawl (very cheep).
pifonski

Hi,

Your printer pickup roller has already worn out. it got to replace.

Yes ... or try a different **** of paper.

Good day, Check the table below about the problem of paper jams.

Display and Meaning

[Paper Jam 0] - Paper has Jammed in the feeding area of the paper input tray.
[Paper Jam 1] - Paper has jammed in the fuser area or in the manual feeder.
[Paper Jam 2] - Paper has jammed in the paper exit area.

hope it will help you.

no thanks don't need any help

remove the toner box then clean the black colour roller with a wet smooth cloth.

dont worry clean the black roller gently with wet cloth

Hello,
Don't try a dozen things suggested by people online who's credentials are unknown. Go straight to the source.

I had the same issue and just went to www.samsung.com - looked up my model #, downloaded the PDF manual 86 pages and did a search for that error. It had step by step picture diagram of how to clear out the jam.

I just saved the company a few hundred on a service call to our printer sales/service vender.

there 9is a paer sensor which senses when there r papers ,prob might b that either it is not functioning or on of the sensor is depressed