10.00.01 Supply Memory Error. on hp printer 5550 dn

go to hp.com and see how to cold reset the machine that should wipe the memory and clear the error

sounds like bad power-supply inside.
it will take a savvy technician to fix.
the question is, Is the labor less than a new one.
in the USA we throw most things out. brocken.
do to that 1 fact.
i dont like them but there is geek squad. ask them for a quote.
if no quote given , walk.
just like car repair,

The error says that the printer has a "fuser motor startup error".
Not a good error to get.
Possibilities are a bad fuser motor, bad DC Controller or fuser drive assembly.
If you haven't already, power cycle the printer.
If the error persists, you are going to have to have a tech look at it.

go to page setting of the printer. reset it to default.

Memory Supply Error 10.00.00 The printer is unable to read or write to the print

cartridge e-label, or the e-label is not on the cartridge.

Basically what is happening is the printer cannot read the small chip on the toner cartridge. The chip is located on toner cartridge as it is inserted into the printer. 1 - Make sure the toner is firmly seated into the printer. 2 - Power cycle the printer with the toner out of the printer. Install the toner back into the printer. 3 - Install another toner cartridge. 3 - Verify that the e-label connector is firmly seated in connector

Contact a local HP Authorized Service Center for further assistance.

For which os? (operating system)

hello

You could try with different cartridge try to clean the contacts , check wether the cartridge is seated properly , make sure weather the strip is removed from the cartridge
OR
If you use a HP original cartridge, then you shouldn't have this message.

Anyway you can print, it's only at startup that this message appears.

If it is a HP toner, then change it.

Or
try this link and you will find answers for all your printers errors

http://www.all-laser.com/cgi-bin/webc.cgi/error-code.html

This is from HP:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=bpl12227&prodTypeId=18972&prodSeriesId=25470&locale=en_US#A60

Please rate me if this helped J

The printer cannot read the memory tag on the black toner catridge. Power the printer off, swop the black toner cartridge for another colour.ie put the cyan, magenta or the yellow in the place that the black should go and fit the black in to space left by the colour. Power the printer on and see if the error remains the same.If it's the same error then it could be the cartridge reader in the black position.If the error changes, then it's possibly down to the black cartridge.

i have printer 5550 error code 59.0 coming so i need hp sevice help