68.2 permanent storage write fail.
(for help press ?, to continue press ok)
if i press ok it will print what ever job was sent but you have to kepp on pressing ok for each job send, but its not proper because its a network printe thus i need a solution that will clear this error massage for good.
thank you for yuor solution. this is for my hp laserjet P4014n printer
Hi kgrema! I will be glad to assist you in this issue,
Usually all you have to do is initialize hard disk even if you do not have one. Just turn off the printer. Turn the printer back on and when the memory starts to count hold down the menu key until all three lights come on. When all three lights are on solid release the menu button and press the arrow back button and initialize disk should appear in the menu. Just hit the check mark button again and it should take care of the problem.
Here is the link just incase it does not solve the issue.
HP Support document
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=bpl12422&jumpid=reg_R1002_USEN#A46
I hope this will solve your issue
Not resolve the issue.....
still pending
when Initialize disk appear
bellow arrow button is not working.
Hello !
From HP Support:
68.X PERMANENT
STORAGE WRITE FAIL To continue press (Select)
Description
A nonvolatile storage device is failing to write.
Pressing the Select (check) button should clear the message. Printing can
continue, but behave unexpected in response to the changed settings.
Another suggestion:
Turn off the printer. Turn the printer back on and when the memory starts
to count, hold down the Menu key until all three lights come on. When all three
lights are on solid, release the Menu button and press the arrow back button (<) and
the initialize disk should appear in the menu. Just hit the Select check mark button again
and it should take care of the problem.
Hope these suggestions help.
68 Error / Service / Cold Reset
All printers
LJ4, 4+, 4P
68 Memory
IIISi, 4Si, 4V
13,195 views
Usually answered in minutes!
I didn't understand what you said when you said,"Just hit the check mark button again and it should take care of the problem." What is this?
thank you but the problem still persists
thank you but the problem still persists
thank you but the problem still persists
really thank you for Fixing this Problem its work and the Error disappear
my Printer is HP CP3505X and it work very well
×