Depending on your model. The U-line units need to reach temperature first before calling the water to fill. Try turning the thermostat to a warmer setting and see if that helps. Or you can see if your coil on the valve is open.
83 views
Usually answered in minutes!
Do u know for a fact that I/M is working???? If it is, then remove bottom cover on front of machine after you unplug it and turn the water off and replace water valve. 9 times out of ten, its the I/M and not the water valve. Some of these unit have an electronic main board that controls these functions, list model number of machine for better assistance.
×