Mitsubishi Medallion format problem

SOURCE: my t.v. wont turn on.

hold down the menu + device for five sec what is the error code?
should be like 1 pause then a 2 or something

SOURCE: mitsubishi medallion 1080 tv

try unplugging your convergence board and see if it powers on my samsung had similar problem except red timer light,anywho i unplugged mine and it powered up

SOURCE: green light flashes on my 65 mitsubishi 1080

You need to replace 4 capacitors on the "DM" board. They are 1000uf and 16v. The board is located under a metal shield on the left side of the set (looking from the rear).

SOURCE: Misubishi Medallion 1080

If this is a ws-65411: it sounds like one of the two STK-392-110 convergence IC's is bad; you need to have both replaced at the same time; I do this type of repair(done hundreds of them) and most can be done right in your home.

The two ic's can be purchased on Ebay for about 12 dollars plus shipping.

This is the slow time of year for TV repair shops--find someone in your area who knows how to do this kind of repair---here shops charge 3-4 hundred but I charge 200-250 total depending on brand of set.

Shop around and if they insist on "taking set to shop" keep looking---any good tech can do this repair in your home---MAKE SURE HE CHANGES BOTH of the IC's!

I do this here for free so if this has been helpful give me a vote here.

Testimonial: "very helpful"

SOURCE: my 65 in mitsubishi medallion hdtv 1080 wont turn

Fisrt try resoldering your Boards then Ck pico fuses they are green or yellow look like resistors but are fuses 5amps or 6amps also you may need to replace Both of your STK ICs they are Big Black ICs will have Part number on them example STK392-570 Call Mats For these 1-800-628-1118 Go by number on your STKs

Testimonial: "excellent knowledge and communication! "