My Danby DWC512BL has stopped cooling. The

Hello,
I found the users manual for your Danby! You have erroneously called it a 35 bottle unit, when in fact it is a 50 bottle unit. Click HERE for you manual. In the manual, it says you can use the light manually or automatically. There appears to be a switch on the bottom of the unit. I suggest the manufacturers manual for it holds a great deal of information that can be of assistance in the future, as this is a discontinued model
Good Luck, and I hope this is the answer you are seeking. Please rate and comment, Thank You Joe

http://www.danby.com/manuals/DWC512BL.pdf

Most small unit like that the cold control in inside, and by the fan to one side or the other.

its because the weather

if unit has a thermistat you need a thermistat if it has a digital diplay you need a control and thermistor. these are what controls the temps when they get to desired temp

Before you worry about where to get parts,you need to know what is wrong and what parts you will need. When a compressor does not run but the fan motor does, then either the compessor is bad (in which case you need refrigeration expertise) or the starter components have failed ( in which case you can replace. The two most common failed parts are the start relay or the overload (both attached to the compressor. Goodluck, Macgivor

my danby wine cooler wont get cold what to do

Once I figured out there were black plastic caps covering the screws holding the inside back panel in place, it was an easy fix. The cooler is now up and running. Thank you for giving me the $10 incentive to figure it out myself.

I found a repairman who knows how to replace failed thermostats using other than OEM equipment.
WSN