How to access and replace spark module on CVGX2423

It is beside the thermocoupler , Buy new one .
Remove old one .
Install new one .

It sounds like you need a new spark module which controls all of the burners. It is part number W10475147. It costs around $115.00!

Yes, it is the spark module. It needs to be replaced. Sometimes it's easy to reach and sometimes not. I am trying to get my hands on a Jenn AirJGD130ADB Repair Manual becasue I have the same problem.

Sorry to read about your problem, I hope this helps you out.

yes needs special tool

I tried to help you. Please help me and Rate/Vote on my response, thanks and good luck

Hi,
Here is a tip that I wrote to help people troubleshoot problems with their cooktops not igniting.

Cooktop Range Stove spark ignition does not work
http://www.fixya.com/support/r5649407-cooktop_range_stove_spark_ignition_not

heatman101

Either a grounding problem in the ignitor circuit or ignitor leads have been swapped between burners.

Your problem is a stuck igniter switch or a bad spark module.
Each surface valve has its own igniter switch. Turn off the gas. Remove the panel covering the valves to access the switches.
With the gas OFF,turn on all surface switches. Move the dial past the LITE setting. The switches should still be making the sparking sound.
Remove one wire at a time from each surface switch.
When the sparking stops,that last switch with the wire removed will be the bad switch. The one that needs replacing.
If you do not find a bad switch the main spark control module will have to be replaced.
Part # 71003385 Igniter switch.
Part # 71002783 Spark module.
Occasionally a igniter switch becomes dislodged from the correct position and can be re-seated. Look at the position of all switches before you do any test. Make sure they are all seated.

I need access to the spark plug module for replacement. The plastic stove top seems sealed to the metal housing. How do I gain access? Creda GH 102 series cooktop. Spark Module Replacement.

short in the fan wirring.. it is not easiy fix . you need to replace the fan and short wieeing.

you will need to contact your certified local service tech.you might have a distributor problem at yor ignitor box.if the problem is not with your ignitors.