My machine keeps stopping during its cycle with error codes. I cannot complete a full cycle without having to keep turning it on again after each error message. At least 3-4 error messages per cycle?

SOURCE: Washing machine keeps stopping

pull the machine out and put the drain hose into a bowl to empty the water out when you have emptied it try cleaning the pump filter and check the drain system for blockages if that is ok then it looks very much like your door interlock is duff good luck and rate me.....

SOURCE: aeg electrolux error message E20 has just flashed

Hi,

it might refer to any blockage in the water supply. So cleaning the pump could primarily resolve this. but it might also be a blockage in the soap tray (when available), the tap or the hose attached to the tap or the air-gap or any water control structure. but most of the times, it is simple blockage of pump. just pull out the manual, remove, clean and replace the pump. this will solve your problem.

cheers

Barry Coates

• 3463 Answers
• Posted on Nov 23, 2009

SOURCE: F-08 Error message keeps appearing

Error code F08 indicates that the heater relay cannot be activated.
Check connections on
1--pressure switch.
2--heater element.
3--control module.
If you still cannot get it to work, then you are probably going to have to call an engineer.
Please rate my solution.
Thanks.

SOURCE: KEEP GETTING E70 MESSAGE

Are you sure its a E70? If so, the hot and cold lines are reversed.

SOURCE: SAMSUNG 845 - ERROR MESSAGE HE2 - not in manual

heater or wiring