I HAVE A HONEYWELL DEHUMIDIFIER AND ITS DISPLAYING AN EH ERROR

copy and paste link page 21, also in your manual.

https://www.honeywellstore.com/store/images/pdf/honeywell-tp-series-dehumidifier-manual.pdf

Step 1: Reset the printer

1. With the printer turned on, disconnect the power cord from the rear of the printer.
2. Wait at least 60 seconds.
3. Reconnect the power cord to the rear of the printer.
4. Turn ON the printer, if it does not automatically turn on.
5. Wait until the printer is idle and silent before you proceed.

Step 2: Update the printer firmware
Click here to know different methods of updating printer firmware.
Step 3: Printing Documents
You can resolve the error by canceling the print job, and then changing the print settings in the printing software.

• Frist, Press the Cancel button to cancel the print job or clear the error.
• Then, change the paper settings to match the loaded paper in the printer, Refer HP Printers - Printing Documents (Windows)

see page 22 manual

https://sps-support.honeywell.com/s/article/What-are-the-error-codes-in-an-E3-SA
https://www.haierappliances.com/support/support-content/34659

Code eh indicates that the humidity sensor is malfunctioning.

Take it in for repair.

How do you start this i got it use have no book on what to do.i plug it in and all happend was the light blink red how to start help please thank you honeywell. 1504 /011344

Go to another post on this site.

What does the eh code in the hundity selector on the soleus air 70 pint...

Good Morning Mark, thank you for your post!

I see that your Frigidaire dehumidifier is displaying an error code of "ES" and you would like to the meaning of that error code. The "ES" error code stands for evaporator thermistor error. This could be a possible problem with your control panel, thermistor, or a wiring harness. I would recommend contacting your manufacturer for further assistance with your dehumidifier. Best of luck! -Matt

"For the above error codes, Power the unit off, and then unplug the unit for 15 minutes. Plug in and power on. If the issue persists, please contact customer service."
https://edgestar.zendesk.com/hc/en-us/articles/201000315-My-dehumidifier-is-displaying-an-error-code-What-does-it-mean-