Searching using https://www.google.com did not locate a manual, but a Sears web site showed a drawing that might be of assistance to someone repairing it.
https://www.searspartsdirect.com/model/4rvivrs5qn-001037/sunbeam-84071-processor-food-processor-parts
SOURCE: attachment stuck on shaft of food processor
put the mixing bowl up as much as possible. spray some wd40 into the groove between the attachement and the motor shaft. Wait for several minutes, then with a hammer and a piece of wood, give the bowl a good wack. With a few goes, it will gradually come off. I will be putting some butter inside the attachement from now on to keep it lubricated
201 views
Usually answered in minutes!
×