SOURCE: Top Buttons on Keyboard not working
Go to your Start menu, Control Panel, then look for Keyboard. Sometime keyboard is listed by itself, other times it is under another device name. Click open keyboard, then click on the BUTTONS tab. You will see 5 "buttons or selection options: Calculator, E-Mail, Help, Search,Connect. Mine does not open the Club Q button ...that's what I am searching for at this time.
Skip the calculator one (once the others enable, this one fixes itself for some reason. I went to the e-mail button first. Double click it. Under choose a button capability: scroll down to the "Simple local file with label". Then go to the bottom "ADRRESS" area, delete what is there and put in your favorite web based e-amail addree login address. For yahoo.com it would be: Http://login.yahoo.com ...yahoo will switch you to their secure server don't worry. Do the same for any of te buttons you wish to change.
If the buttons do not show up at all, then you will need to upgrade your driver. HP has an upgrade for its multimedia keyboard, I am sure you can google yours and find it, even if Windows cannot do so.
You have to have the Calcultor chosen on your Windows setup for it to work, but it just pops up after you update the other buttons. If it doesn't. Its address on an XP os is: something like: c (whatver your hardrive is located)://windows/system32/calc.exe ... thing is it can be different for different systems.
Now to figure out how to use that 6th button, the Q Club one?
Good luck.
SOURCE: None of my buttons work except the ON button
Sounds like a possible short to me, But I don't have experience with that cause I have yet to test my calc with water if you know what I mean... The one thing that I can suggest is trying to connect with another persons calc and try the "send OS" command to see if that will reset your calc to a working state. Sorry to hear about the damage though.
-Saik0Shinigami
SOURCE: HP 7590 office jet pro scanner does not communicate
Hello,
The scanner function is not available when you are connected wireless, you must be connected via USB to your PC for the scanner to function correctly.
Buddy
Corporate Computer
Over 21 years of PC and printer support/repair
SOURCE: My remote for my Panasonic DMR-ES45V will not work
Press 1 and ENTER together. Hold for 10 seconds.
Should splve problem
SOURCE: My zune middle button won't work
well i had the same problem for about 3 months...i tried doing research and found a website...http://www.rapidrepair.com/guides/zune/zuneassemblyguide.htm...i took my zune apart and then followed the steps only till step 5..then i let it sit out like that for about and hour, then i put it all back together and my buttons work..there is also video on youtube for problems like this, simply go to youtube and type in <Take apart zune to reset (doesn't work)>
The green lights next to the line or pool buttons show the current Line Ringing settings for all
lines or pools assigned to the extension. (If a line or pool is not assigned to a button, the green
light next to that button is off.) The following ringing options can be shown by the green light
next to the line or pool button:
? Immediate Ring - on steady
? Delayed Ring - flashes slowly
? No Ring - flutters quickly
3) Press the line or pool button until the button light shows the correct setting (the setting for the
currently selected line or pool also appears on the display).
4) Continue programming, or exit programming mode.
Line selection:
For incoming calls, the line selection (hunt sequence) is set by the local service provider). For outgoing calls....again....it depends on the system. For the Partner ACS:
1) Press FEAURE 00, SYSTEM PROG, SYSTEM PROG, CENTRAL PROG at extension 10 or 11.
2) Enter the number of the extension to be programmed for Automatic Line Selection.
3) Press **.
4) Press the line, pool, or INTERCOM buttons in the desired order. The valid entries for Automatic
Line Selection depend upon the type of extension:
? Key Extension: Outside system lines, Left Intercom (the factory setting)
? Pooled Extension: Pool 880 button 1, button 2, Left Intercom, Right Intercom (the factory
setting), Pools 881-883, individual lines
For each button pressed, a display similar to the following appears:
Automatic Line Selection
5) To exit Automatic Line Selection, press **.
6) Press CENTRAL PROG and enter a new extension number, or exit programming mode.
Changing line ringing and line selection are tasks that are normally reserved for the Administrator of the telephone system.
170 views
Usually answered in minutes!
×