SOURCE: washing machine water control
remove the cold water hose from the back of the washer. look inside the area where you unscrewed the hose from. there is a screen in there. if its clogged with sediment remove screen and clean. if that doesnt fix it or if theres no sediment youll have to replace the valve to fix the problem
SOURCE: My Admiral Washing machine only runs the hot water (not cold)
the water temp switch is bad call aplience parts store in the area
SOURCE: Cold water wash very slow fill up
Hi, you have a blockage on the cold side of your inlet valve, take the hose off on cold side of the valve and inspect screen..You may find some debris. If no debris is found you may have a bad valve..your going to need to replace it...if you have any questions please don't hesitate to contact
94 views
Usually answered in minutes!
×