Manual for Kodak easyshare camera M580 - Kodak Cameras

SOURCE: No power to my new Kodak - Series 3 EasyShare Dock for Select Kodak EasyShare Digital Cameras

Hey ditzydiana,
If you just purchased the camera and you are already having problems with it I would not try to troubleshoot the problem I would exchange it for a new one. If you purchased the camera from a Best Buy™ store the return/exchange period on the camera is 14 days. I hope this helps!

Sincerely,
Allan
Go Ahead. Use Us.

SOURCE: copy of the user's manual for my Kodak EasyShare C3330 dig camer

here is the link
http://wwwcaen.kodak.com/global/plugins/acrobat/en/service/manuals/urg00409/C330_GLB_en.pdf

SOURCE: looking for manual for Kodak EasyShare C913 digital camera

Hey

theres a online user manual available here
http://www.kodak.com/global/en/service/publications/urg00898toc.jhtml?pq-path=13177

or heres a extended user manual with more content
http://www.kodak.com/global/en/service/publications/urg00897toc.jhtml?pq-path=13176/13178

SOURCE: my kodak easyshare M580 wont download onto my

DEAR SIR,

The best way to download pictures from your camera to your computer can be done by two means....

1.INSTALL THE SOFTWARE C.D GIVEN ALONG WITH THE CAMERA IN YOUR NOTE BOOK....
THEN SWITCH ON YOUR CAMERA AND CONNECT THE CAMERA TO YOUR P.C VIA U.S.B CABLE,AND WAIT FOR FEW SECONDS FOR THE P.C TO DETECT YOUR CAMERA,ONCE THE CAMERA IS DETECTED IT WILL ASK YOU,WHETHER TO COPY YOUR CAMERA IMAGES TO YOUR P.C


2..Remove the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive.

thank you..take care

SOURCE: how do you stamp date

1. Press the Menu button.
2. If your camera displays a menu with tabs at the top:
a) Press the Right/Left buttons to highlight the Setup tab.
b) Press the Down button to highlight Date Stamp.
c) Press the OK button to add the date stamp to new pictures.
3. If your camera does not display a tabbed menu:
a) Press the Down button to highlight Date Stamp. NOTE: Depending on your model, Date Stamp might be within the Setup choice.
b) Press the OK button to add the Date Stamp to new pictures.