AEG Lavamat Protex keeps stopping at 10 mins and then 5 mins when on a 20 min cycle. Have to keep pausing and then restarting machine.

SOURCE: AEG Lavamat Turbo 12830 - error code E20

Hi

E20 means there is a bolckage in there
remove filter and clear any debris in there and check impeller is turning ok.

regards

SOURCE: AEG OKO Lavamat Update washing machine LAVALOGIC 1600

Hello,
This error code (C3) means your water sensor has detected a leak. it will stop when the sensor is dry.
Try getting the water out of the trap door and letting the machine dry.

I would also unplug it for secirity reasons.

Basically your water pump is getting tired or the sensor is dirty. Try cleaning the sensor or else you may have to change the pump.

Good Luck!!

SOURCE: AEG 72640 stopping mid-cycle no error code showing

I have the same problem with my Oko Lavamat 74639 Update. I've tried changing the vacuum sensor, but no luck.
Did you get your fixed?
Olafur

SOURCE: AEG Lavamat 518 manual

Head over to the manufacturer's website.

Typically they have a SUPPORT section - where you enter the FULL model number, and then can download a FREE manual.



Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

SOURCE: Keeps pausing in the middle of wash cycle. Sits

the timer is busted getting stuck at same point their expensive as well