SOURCE: 15 mo. old Kodak 5300 has stopped printing printed matter
I had to buy a new printer head for this Kodak 5300 all-in-one printer.
SOURCE: kodak 5300 first said error 3802 now says print head missing or loose
I got the same Problem as listed above. This is the way how I was able to solve it:
Hope this solves the Problem. Best wishes
SOURCE: My 5300 printer won't print black ink. I just
Replace the printhead. call kodak at 1.800.421.6699 for a free new one, with FREE ink, too.
SOURCE: the printer is not printing. how do i obtain a new
You MAY not need a new printhead... it's possible that it could be the printer. If you go through the troubleshooting guide on the Kodak website, it will give you a good indication of what the problem could be (printer or printhead) and offer the solution on how to resolve.
http://www.kodak.com/go/itg
Just follow the troubleshooting through the steps and it will provide
instructions on what you need to do.
SOURCE: new printer head and still won't print black
Try this one, Turn on the printer, Take out the inks, remove the printhead, put back the printhead make sure it will snap and you hear a click, put the inks back, wait for the printer to initialize, Press the Menu button, look for Calibrate printer, then print calibration page, then scan it after. Load a regular paper. Then try to print a demo page by pressing Photo and Copy at the same for 5 seconds then let it go. If same problem persist call this no for further assistance 1800 421 6699
Thanks
120 views
Usually answered in minutes!
×