Refrigerators Logo

Related Topics:

J
Jerry Ventouras Posted on Apr 20, 2019

How to replace globe in refrig. model WSE6100WA

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I HAVE MOVED THE FRIDGE FROM ONE HOUSE TO ANOTHER. I LEFT TO SETTLE FOR 2 HOUrs, PLUgged IT BACK IN AND TURNED BACK ON, THE Display IS BLANK. LEFT it ON FOR 24 HOURS, STILL NO DISPLAY.

Question edited for all the typos and add Maker.
Please don't type in all CAPS, it is considered SHOUTING and harder to read.

Fridges don't like being moved. If it stays upright the whole time, leaving 2 hours is fine. If laid down, they need 24 hours for the refrigerant and oil to settle.

It sounds like there is a bad connection on the display, so take it apart and check or call for service.

https://www.westinghouse.co.nz/fridges-and-freezers/fridges/wse6100wa/

..
0helpful
2answers

Bulb went in my Whirlpool refrig so I replaced with a fan bulb. Day or two that went so I went and bought appliance bulb. Now that is gone. Any wisdom before I take it apart?

Jetblue Airlines Phone Number is a toll-free helpline where on our customers can reach for help from any corner of the globes. issues like luggage lost, discount coupons and means l related inquiry are quite frequent. just reach for jetblue airlines phone number, anytime you require.For more information:- https://airlinesphonenumbers.org/jetblue-airlines/
0helpful
1answer

Model nd3tt globes went bang replaced globes but still not working please advise if fuse has to be replaced

Could you comment with more information about the model you have. Please note this is the section for Car and Truck repairs.
1helpful
1answer

I have a Hunter ceiling fan model 23577-300. I broke one of the light globes and cannot find out where, if possible, to find a replacement globe?

Same issue. I found the part number for the globe but it is no longer available. If you plan on replacing your fan will you sell me the unbroken globes? :)
0helpful
1answer

I operated the "Holiday Mode" button on my Model WSE6100WA fridge. After returning the temperature display etc does not illuminate so I can't operate any temperature controls

The eco/vacation mode only exits when the door is opened if it was started automatically by the refrigerator. Since you pressed the eco button, you'd have to press the eco/holiday button until the display shows no icon for the feature.

How long did you have the power off to the refrigerator? Try pulling the plug for a 5 minute power outage. If that doesn't solve the problem, I suspect your appliance may have been damaged by a power fluctuation while you were away. Without additional information, I can't tell if only the display panel is damaged or if something else is wrong. The parts diagrams for the refrigerator are available here: http://spares.bigwarehouse.com.au/index.php?cPath=64685_78487_78846 .

I hope this helps.

Cindy Wells
0helpful
1answer

I want to know how to remove the globe so I can replace the halogen bulb on my ceiling fan light. It is model Model # acsy0205-1cc .

There are usually 3 hand tighten screws surrounding the opening where it meets the socket portion. With one hand on the bottom of the globe, loosen the screws with the other hand (carefully remove globe)
0helpful
1answer

Door handle clips replacement

iam looking for doors handle barcet for model no RS662V westinghousetwo door frigde freezer
0helpful
2answers

Freezer not working

Your refrigerator has a Control-defrost,adaptive timer ,PC board part number 241508001
This is providing your model is the one listed above your post WRS3R3EW. The model you listed in post does not come up. Until we can determine that the freezer is not defrosting you need to unplug and remove the back panel of freezer compartment to see if the evaporator coils are frozen or clear. If frozen this alone will cause a chain reaction that keeps vents to fresh food compartment open and cause freezing in that area. Go to link below and enter model number WRS3R3EW0 Then you will see a list of diagrams on left side, chose #11 this will show the control parts. Click link below Thanks, Sea Breeze
We offer free help and assistance also.

http://servicepartstec.blogspot.com/
0helpful
1answer

Hot fridge seal

sounds like its overheating badly, check the condensor coil under refrig asuume its toatll clogged also check the condensor fan motor located behind refrig next to the compressor, its supposed to blow away the heat and keep things cool under there if its not spinnig youll need to replace that as well
Not finding what you are looking for?

39 views

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you a Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...