How to change the date and time in the orca 1080 glasses

I am thinking that model number might be suspect as my searches aren't finding that. 'Orca' is the model, 'Arctic Spas' is the maker. There are manuals and information in the lower link, but I think this is your manual for the Orca model.

Arctic spas Orca Manuals ' ManualsLib

https://www.manualslib.com > ... > Hot Tub
We have 1 Arctic Spas Orca manual available for free PDF download: Owner's Manual. Arctic Spas Orca Owner's Manual (124 pages).

https://www.google.com/search?q=manual+Orca+Spa+model+838335R

..

This is the only place that says it might?

https://www.pacparts.com/library/model.cfm?mfg=Royal&model_id=ORCA%209512X&action=list_part&back=0

ShredderParts.com is the go-to place, but they don't keep parts.

https://www.google.com/search?q=Royal+orca+9512x+parts

Your best bet is probably going to be to take the circuit board to an electronics technician and ask them to test and replace components that have failed.

..

Answer Line: Change your Wi-Fi password on various ...

www.pcworld.com/.../change-your-wi-fi-password-on-various-...

PC WorldFeb 11, 2013 - But Wi-Fi passwords, like every other kind, need to be changed every so often. Here's how to ... Android. You can't simply change the password here; you'll have to delete the network from your phone or tablet and recreate it.Missing: orca

How to Connect Your Android Tablet to a Wi-Fi Network ...

www.dummies.com/.../how-to-connect-your-android-tablet-to-a-wifi-net...

After you've activated the Android tablet's Wi-Fi radio, you can connect to an ... ... Be careful when connecting to a non-password-protected network. It's possible ...Missing: orca

How do i change my wifi password [Solved] - WiFi - Cell Phone ...

Hi, brucen19

Problem Fixed...

I received "Internal Error 2343" as well. I was able to resolve this using Orca http://support.microsoft.com/kb/255905> to edit the "aiosw.msi" file.

I removed all references to "SetINSTALLDIR" and "SetINSTALLDIR2" under both "InstallExecuteSequence" and "InstallUISequence". I then saved the MSI file and re-ran the Setup.exe and all worked well! I recommend that you make a copy of aiosw.msi before editing in it Orca.

Rather than downloading the whole SDK you can just download Orca here;

http://www.technipages.com/wp-content/uplo...007/11/orca.Msi


Thanks,
Ben

get the manual of the orca twister check it very well u will see contact of the company then contact them on how to get that

the plastic trim pops off and there are screws that hold the glass in place that you have to take out to be able to remove the plexi. it takes about 20 minutes to do

I have the same tv and I took my clear shield off and never put it back on.  The picture is much better without it as it will reflect light and objects in the room making it difficult to see the pic clearly.  I was told by a service tech that the primary purpose of the glass or shield is to prevent damage to the screen from objects, water etc.  If you have no small children in the home you can enjoy a better pic.

May have paper bits jammed above fixed curved metal surface that spiral cutter slices against.  Need to spend time removing built up material with stiff wire or flat tool.

orca 3500: reverse works but auto run does not. Green Light is on, bin is empty but will not shred paper? Any suggestions?

Sorry, it's totalled. The glass is part of the main display planel and cannot be replaced.

The good news is that this model was only a 480P HD resolution. Whatever you replace it with will have at least 720 or even 1080 resolution, and cost no more. That will be a huge improvement you will notice immediately.