32hl95 Toshiba tv has no power - Toshiba Televison & Video

Contact the nearest authorised service center for Toshiba at your town. They can either supply a new one, or can give details about it availability to you.

Try configuring your antenna input. Menu, Installation, Terrestrial, Input Config select your antenna 1 or 2 and > arrow over to select cable. Next auto program: under Terrestrial, Channel Program...this take some time.

Do you have a digital converter box hooked up before it goes to the tv? USA is now digital and you need a converter box.
Thank you,
Lee

Give this link a shot

http://www.toshiba.ca/web/pdf/3237HL95_E.pdf

Should be what your looking for

Hope this helped...

Do you get any indicator lights at all? If you do, the at least the 5v standby circuit is still working. Check the power supply fuse first, then look for 5v standby voltage, if you do have the 5V, then the problem can be in the controller board not sending the ON command to the main power supply when the power switch is activated, OR the main power supply is bad. Look for bad capacitors or bad/burnt parts.
http://en.wikipedia.org/wiki/Capacitor_plague.

Yes you can:
http://www.skakawack.com/wm11-3496.html
or OMNIMOUNT P/N U2-T, U2-F.

put it on hd. the big plugin that say tv or hvd

physical damage is probably not covered under warranty - check your owner's manual and call customer service - they will advise you [dxh]

Reset the unit . Switch off, pull the power plug of the wall receptacle and wait for about 1 min. Then plug it back in and problem will resolve. Check if you have the latest version of firmware

Let stay unplugged for atleast 5min. Then try again