Naxa TV remote will not unmute - Televison & Video

ck here...

https://duckduckgo.com/?t=ffab&q=naxa+tv+remote+control&atb=v159-1&ia=web

Hi.
Unfortunately, naxa tv's aren't compatible with universal remotes, as they use a proprietary coding system for their tv's.

Your only hope is to contact Naxa's support department at [email protected] to ask about replacement remote.
This is directly from their website about the incompatibility with universal remotes.

I know you were hoping you could use a universal remote for your tv, but sadly that's not the case here.

I wish I could have given you better news, but it is the way they designed their sets, that's why universal's don't work.

I hope this helps you out in knowing what to do now, and have a good day.

you can get a new manual here:

 

http://www.naxaelectronics.com/index.php/pages/4/

Hopefully you have resolved this issue, but if you have any additional problems or questions, here is some help. Follow the directions below, and that remote will be programmed right away.


1. Hold down the Clear TV button until all lights at the top of the remote light up
2. Press the red TV POWER button
3. Press and release the up arrow on the remote about once a second until the tv turns off.
4. When it turns off, press the # (Pound) button
5. Try powering the tv on/off, and try the volume. If one or more of these functions do not work, start over at step 1 again.


Becki Barned
DISH Network Customer Service

i install uverse, the auto seek is done by hit and hold TV and OK. wait for lights to flash enter 900 and push play over and over SLOWLY and when the tv turns off, press enter.

NOTE: some tvs WILL NOT program to our remotes

You neglected to post the Remote's Make and Model. However, most Univ. remotes allow you to "Scan" the TV codes one at a time. You would do this and watch for the TV to turn off. when it does, you have the code and can store it.

Geno

Yes, you can. I was able to get my Dish Network remote to work with my Naxa 574 TV. Just follow the directions for the remote and you should be able to use it.

call for a factory remote at1-800-736-6837

need coads for naxa tv dvd combo for an rca remote